I have an aftermarket module that rolls my windows up with a signal from my remote central locking (also after market). It has builtin high current draw sensing for obstacle detection.
I'm kinda wondering if there's a way to make this available inside the car. I could potentially have a button that provides the same signal, but I'm wondering if there's a smarter way of doing it on individual windows (only 2).
In addition I have auto roll down on the driver side (it has a 2-stage rocker switch, whereas the passenger only has 1-stage, I'm wondering if there's a way of adding this to the passenger side
This is probably all a bit elaborate. But you lot seemed like the right bunch to ask with the elaborate nature of some of the electronics and wiring that go on on this forum.
As an aside, I wonder if we need a section that could be more specifically about 'other' car related projects /problems, or whether this general section is sufficient for that? Or whether they're not welcome at all?
Off topic - Window rollup/rolldown
-
- Posts: 115
- Joined: Sat Dec 26, 2020 5:44 pm