On occasion i get plagued by this issue when accessing the zombieverter webpage
Communication problem between ESP and STM
I upgraded my zombieverter just recently to 2.22A., (previously running 2.15)
If i am lucky the issue disappears after a minute or so. Worst case I repower the zombieverter and refresh the webpage.
Did i break anything with the 2.22 update? Is there some update needed for the wifi chip?
What am i missing?
Its pretty annoying not being able to access the webpage and check some diagnostics or re-configure the params.
zombieverter communication problem ESP and STM
Re: zombieverter communication problem ESP and STM
same issues here. Sometimes it shows the same message with my setup (Zombie + Leaf Gen2).
It seems to reconnect by it self so never had problems with it but I wanted to +1 this issue.
It seems to reconnect by it self so never had problems with it but I wanted to +1 this issue.
- johu
- Site Admin
- Posts: 6748
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 380 times
- Been thanked: 1571 times
- Contact:
Re: zombieverter communication problem ESP and STM
There is too many threads on this already, locking up
search.php?keywords=+ESP+and+STM
search.php?keywords=+ESP+and+STM
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9