The pot is used to vary the maximum amount of regen, It affects both off pedal and brake switch activated regen, to do without it you may have to pull the input high to +5v maybe place a current limiting resistor inline and set pot2 min=0 pot2 max =4095 then you will have 100% of your selected regen settings available.mane2 wrote: ↑Tue Aug 08, 2023 10:03 am Do people really connect a pot for regen? I would really love to have working pedal regen, and not adding any pots of paddles to adjust it. When it works well, there is no need for that.
As my pot2 shows value of 27, I changed pot2min to 0 and pot2max to 27 to overcome that, but there was no change in regen. Still always only 26kW regen power and pretty mild. I did not see any change to earlier setting, where I had 4095 for both (min and max).
Ps having a pot that proportionally scales the 2 regen modes is actually very useful In icy conditions