you may reach out to me if you like,
we are on the same hardware and the same software
ive got motor movement, but we seem to have parameters issues.
812-820-5050

zookeeper, it looks like your setting for encoder mode is not set to resolver.

( you are ahead of me .. at least you have lights)
is your motor a toyota and is the resolver factory?

okay thanks for the support, but I dont think pin6 is to be used for the resolver as it is labled 5v output. instead I think pin 1 = yellow ( enc b) pin 2= green and brown ( sin a and cos a) pin 3= red ( enc a) pin 4 = black r1 pin 5 = white r2 does anybody disagree? my assumption is that the image ...

greetings everyone, Ive a question about resolver connections. I believe these are the colors and signals for the gen2 prius MG1 resolver( and if anybody has MG2 connections I can easily find the colors by the attached photo) black GRF = exc a white grfg=gnd red GSN=ENC A green GSNG= SIN a Yellow GC...

the donor vehicle, and the openinverter board in the nissan inverter

this is how I added a 10k resistor to c37

So I couldn't complete my mission to test the battery charging feature. Anyone have a left over buck/boost module (without inductor)? Yes I could just buy another inverter but my space is limited so I'd rather avoid it. EDIT: whats the temperature curve for the heatsink sensor, anyone got that? [/qu...

update. found this on another forum heading and also thanks to others on this forum
viewtopic.php?f=14&t=701&start=90


from johu a callout

yes, I was( am) confused, thank you for the clarification. I purchased from Johannes and the more expensive option whatever that is. my board is new as of june 2020 and says "openinverter.org prius gen2 rev1.0" (c) 2020 johannes huebner on the silkscreen im just dizzy from looking at wikis...

Got the kit today! It is all assembled now and I can connect via the Wifi. I'll play around with it some more this week and see if I can get some lights to flash on MG2 with 12v on the HV. I think I am being stupid, but I can't find the wiki entry for this board? On the link I can find on the wiki ...

Again I'm going to recommend people use the new controller for running the Gen 2 inverter : https://openinverter.org/shop/index.php?route=product/product&product_id=63 But if you must the gerbers for my board are on github: https://github.com/damienmaguire/Prius-Gen-2-Inverter It won't be avail...

I've been googling and reading this forum and am reaching out. I am looking for a place to download the 2015 nissan leaf schematics. I purchased some weeks ago, but when I view them they seem to be wrong for my car and i dont want to waste money on a pig in a poke. my goal is to use the oem engine h...

unobtanium connector is the same as the 3rd gen toyota inverter connector

I had many spares of them, but none of the nissan inverter spares...so I sacrificed the spare toyota for the 2020 openinverter board.

52mph is max speed without spinning the input shaft ( like the I.C.E. would be doing)
here is a link to a nice animation you may fiddle with the rpms yourself
http://eahart.com/prius/psd/

Im the guy who did the youtube video back in 2008.

reach out to me if you like

This cedar and mahogany boat was originally powered by a flat head " Hercules " 6 cyl nearing 95 HP. I got it from a retired millwright who has rebuilt the cabin and hull... He lost interest and I think maybe was having decision paralysis about the direction to go. I have built several hyb...

here is a photo of my LEAF powered antique boat with the help of the openinverter nissan board