what wires (color) does dc/dc use?

If you hang a 2.5K resistor on the "ECO" button - when you press it, the recovery will be 50%?

Maybe it's something like - https://openinverter.org/forum/viewtopic.php?f=5&t=1756 ?

FOC.
Stitched as usual. I went to the address 192.168.4.1 - nothing inside. auto does not turn on. I tried to flash it again - the result is the same. I tried to flash 5.14FOC - everything worked again.

Today I filled in this firmware "stm32_foc.bin" and got a brick from the car. I had to go back to 5.14 I stitched it as always. What have I done wrong?

Is this a new firmware version or an addition to a previously installed one?

Can I have the part number of the module?

Super!!!

A very interesting topic. Something to start the air conditioner compressor I would get.

If you do not mind, I will try to find out here - is it possible to regulate the regeneration on the fly? For example, by installing a push-button or rotary knob.

CAN I do not use

One engine with regeneration, the other without regeneration?

I would like to implement the scheme of operation of two Leaf engines (4x4). Is it possible? How to make two motors work at the same time? Do you need some kind of matching scheme?

I too recently had problems configuring the options. It's strange that the regeneration parameters were in the "Throttle" section. This made me difficult. Especially considering that the previous version of the software worked fine with regeneration. Thanks to Johu for explaining my mistake.

Everything worked out. Although the connection with the pedal is not clear. Thanks Johu.

OK. I am not using the second potentiometer yet. I'll try to change it. Thank you.

On the weekend I tried to put different versions. All versions from 5.05 (5.05, 5.11, 5.14) do not have recuperation. When installing version 4.96 or 4.97, recuperation appears immediately. Something in the code is not correct.

I can not do this. The wires from the accelerator pedal are directly connected to the inverter board without CAN

Installed this version instead of 4.96FOC on the Leaf engine - the regeneration disappeared. This is fine? How to get regeneration back?

Today I uploaded the FOC version from here viewtopic.php?f=7&t=1203. And a JSON file with default Nissan Leaf engine parameters. My Peugeot Boxer went fine again. What's wrong with version 5.05? Is version 5.11 stable?

FOC took from here https://github.com/jsphuebner/stm32-sin ... ag/v5.05.R
SIN was taken from the first message - stm32_sine.bin
Inverter Nissan Leaf + openivertor v.3

I installed this firmware today instead of 4.96. Now I can not start moving - when the accelerator is pressed, a jolt occurs and the "OVERCURENT" error appears. How to fix?

Died ULN2003?