1. Idle/wake/ unlocked - White or Blue Constant 2. Plugged in and waiting + locked - Green Constant 3. Charging started + locked - Green Pulsing 4. Stopped and unlocked - White or Blue Constant 5. Error - Red Constant I like this color scheme, with white light after waking up. In my case, the LEDs ...

I have left out the 2k7 (3k) resistor for now, as it is not there at BMW either. If necessary, I solder a THT resistor to the underside of the board at the connector between pin A10 and A12

Changing was easy. Now it should also work with the Tesla charging points.

johu wrote: ↑Mon Feb 05, 2024 8:51 pm Is anyone using the older foccci?

I have the old foccci. If only the resistor needs to be replaced, I would simply resolder it.

I can do it however I want. BMW outputs cable and EVSE limit in whole amperes and a few other things so that the AC charger knows what to do. I have attached the corresponding frame from the LIM. ID 03B4 48/8 CHGNG_TYP_IMME Laden_Typ_Aktuell 00 Kein Ladeverfahren 8 bit enum 01 AC-Laden mit Typ1-Stec...

I only use one plug. To manage the AC charging I need a CAN output from clara with the EVSE and cable current carrying capacity. I would return the charging status via CAN so that clara can switch the 1k3 resistor and the lock and the LEDs display something meaningful.

Es ging um meinen Text, die Richtlinien habe ich natürlich in deutsch.

Since I am working towards the TÜV, I have done some further research. Directive 72/245/EEC was amended in 1995 by Directive 95/54/EC. This means that for vehicles before 1995, radio interference suppression only has to be proven for engines with spark ignition, after that for all engines. hope goog...

I took another look at the LIM. According to the circuit diagram, PP is connected to pin 2 (A250-B2) in the CCS2 version. No resistor is shown in the charging plug. CCS1 has an additional jumper from pin 2 to pin 6. This pin 6 is connected to GND (PE) in the LIM via 2k7. This means: In EU no 2k7 to ...

I took a look at the input circuit of the LIM. PP goes into an R330 and a 47k resistor. The other side of the 47k goes directly into the microcontroller. The second side of the R330 goes into an unknown component with 6 pins. Two of the pins are bridged. The remaining 3 are connected to 5V, GND and ...

For AC charging, there is a resistance between both plugs between PE and PP, e.g. 220 ohms for 32A current carrying capacity. The PP of the charging station is not connected to the PP of the car. The resistance on the car side is read from the car. How this is done may vary from control unit to cont...

a simple and safe way to read a VR sensor is to use a MAX9926.

https://www.analog.com/media/en/technic ... ax9927.pdf

I like the new version because I can access all OI devices with a single, stable network connection. The adapter is normally inside the car
next to the notebook. I also have a 20m CAN bus extension cable that I can use to easily get from the garage to the office.

uhi22 wrote: ↑Wed Jan 10, 2024 9:13 pm No, you are not the only one

I think it's good. Just tested here. In the past I have always deleted parts of the quote so that it is not so long and it is clear what I am responding to.

Matt describes what should be displayed and how. On the other hand, the task is to solve how the existing displays can be controlled. Your car seems to have electrical instruments except for the RPM and speedometer. If you keep the original gearbox, the speedometer will continue to work. The tachome...

"Zahlen Sie weniger mit eine Mitgliedschaft"!?
do you get money back then?

cheap 70mm² cable https://www.ebay.de/itm/234815285137?hash=item36ac14e791%3Ag%3AT10AAOSwJjBjE1A%7E&amdata=enc%3AAQAIAAAA4JB59J3BE%2BT8xNwdOkJOv%2FkY1y%2FeyBnj%2FqTGAvRI%2ByBEGo5nJk5ylcbo9O39VBV26acpOVp%2BPrS2xaSVxfa2yU3HZ9kKbPICzU1puQCdnlgg40yXSDhJpXVkFNWVnyoD66slNfvOxvO8X6lcsxqev8JxPP9GGQsDvkv...

I would also get in touch, but my project isn't ready to go yet either. The electrical part and the complete chassis are finished, but the body still needs a lot of sheet metal and paint work.

They sell individual Tesla components here:
https://stock-tesla.com/en/index.php?ro ... t_id=45120

Many people here in the forum have broken Tesla engines where the rotor is OK. Mane2 for example. Try an ad in classified

I could imagine that the stator of the Sport Unit has a smaller number of windings. How else could a higher current flow at the same voltage? A comparative resistance measurement could confirm this. Does anyone have values for one or the other unit?

Look at the PDF on page 11

viewtopic.php?p=26258#p26258

There are other points to consider when testing an electric motor. Dynos are primarily built for ICE engines. In order to measure this in a comparable way, the air pressure and the air temperature are measured and the determined performance is corrected to sea level and 20°C. In addition, the transm...

There are roller dynamometers with known inertia, roller diameter and speed detection. The performance is then calculated from the acceleration based on the driving speed. If the gear ratio is known (measured or entered), the power and torque can be specified based on the motor. I myself have a smal...

delete all <some_hex>.json files on the esp32 then select some random node ID and then 22 again and shortly wait for the download. that makes the difference. Now I can switch back and forth between LDU board with 5.32R.sine and CCS. Only from node 1 to node 22 is quite far. Can I change that, to 1 ...