sounds perfect, that was only 30% throttle too?

We. Need. Video.

I've sent you a bin with a change from Tom, possibly fixing this limit issue. God Speed

FrontRearBalance doesn't seem to do anything. It's hardcoded to 50 for all vehicles except Subaru but doesn't seem to be used for anything.

Try Janosch https://foxev.io/openinverter/?ref=oi

I've downloaded the images and attached to post.

BIN PM'd

royhen99 wrote: ↑Mon Feb 19, 2024 11:18 am uint8_t is unsigned integer, int8_t is signed integer ( -128 to 127 ).

HAHA I totally misread that

int8_t is unsigned integer. Did it fix the cutting out though?

https://github.com/damienmaguire/Stm32-vcu/pull/76 Has the fix, apply that and you're golden.

Also https://github.com/crasbe/ZombieBuild is the easiest way to build
What about when it's below 0?

Go back to the graphs if that's more reliable?

Did your log cover a torque cut?

So that's Zombie cutting, now to workout why. *EDIT* ok so the only things that can command a torque cut are : motor rpm, hs temp, motor temp, battery undervoltage, idcmax Plot these to see if they're sane, and post your params? Gaffa says he's happy to have a phonecall with you to debug if it'll he...

Gs300h does, 450h doesn't

There's no built in DCDC for 12v within the GS450h inverter

The gaffa on discord says "he needs to plot torque also to see if its zom or the inverter commanding the cut
and see what his revlim is set to"

PM'd you a bin

ah, there's some code in the gs450h if(temp_inv_water>120) temp_inv_water=120;//bodge to prevernt overtemp wrap until is fixed properly. This has been added since the last release. https://github.com/damienmaguire/Stm32-vcu/commit/02cadff6da6c460e7c85cac492b04cba77c567b8 This is the inverter tempera...

Might being dim, why is it undrivable?

Not done a video this week as its just boring battery box stuff, but here's some photos. Will put out a battery box video when there's more to show for it. IMG_20240212_171138174_HDR.jpeg IMG_20240209_174156996.jpeg IMG_20240209_174059033 (1).jpeg The 2 long sides and lid will screw on, the bottom a...

Did you film any of it?

Thanks, I'll give it a watch. Interested in now they get the ISO-TP response mappings. I've got much of it now, I think, but would be nice to be able to confirm with something 'official'

I couldn't get canZE to work with just the pack.

Ive figured it out, and now working on some code, will add the github when it's done. Some values still need some work, but I'm able to query all the cell voltages and some other values.

It's only one battery module held in place by a bungee cord but I needed the motivation boost.

Pot size irrelevant, connect one side to gnd, other to vcc and wiper to A0