Good news, I also bought one of those 2nd hand from someone who went a different way. So I have both hardwares. Is it version 1.3? Early versions don't have the user PWM connection. Stupid question, how does it know whether it's in charge mode, and is charge mode also what happens during regen? Bec...

The booster is limited to 100A, so this will get you 10 kW

The order has gone through now, I'm excited! On another note I wanted your input on this. Here is the current pinout: focci_pinout.jpg The two contactor outputs are on different plugs. The LEDs and button are not on the plug that is more charge port oriented but on the car oriented one. Now I though...

Also, does any of what you described require using new pins or telling the buck/boost what to do? Any code or software? Or does it just happen by being connected? Sorry, just found this. With the SMT version of the Prius controller this is integrated. In drive mode the "user PWM" pin runs...

I like to use my cheap Chinese grid tie inverter

screen capture would help. Is it the new "green" interface or the old "white" one?

Yes I see it now and no that will not cause an issue

Yes indeed. It's 28€ just for the QCA chip and like 20€ for the remaining board :) Order went wrong. Went through till payment, then suddenly jumped to order history. Cart and history empty :( Couldn't start over because the QCAs are now stuck in the zombie order. Meh, they'll figure it out. I have ...

Veeery nice! Udo will like that.
I think you have the book, right?

Maybe you can be somewhat compatible? But don't want to restrict you Attached some notes also, but the table from the book is more up to date

Very tidy install and great re-use factor!
Are you using the stock battery-to-drivestack cable as well?

Another milestone reached today. I ordered 10 QCA7005 chips to JLCPCBs factory and can now select it for assembly :) They are a bit expensive at 28€ a piece but that is better than loosing chips to nasty soldering, let alone the time this consumes. So this quantity will appear in the shop in about 2...

First cut of a breakout board with mini mainboard for first tests

Good luck! Various proprietary solutions exist, would be nice to have an open source one

No, this is just needed for actual resolvers as they output like +/-1V. Your chip likely outputs between 1-3V or something, so unipolar already

Great to read :) That's very strange as I'm running the inverter (on a Zoe motor) without the mod. I even faintly remember that the pin drew excessive current when feeding it 12V. Another user reported the mounting holes to be off and they fit my inverter perfectly. I wonder if there's different rev...

Just tried opening the project and there seem to be some missing files: Fehler traten beim Laden der Footprints auf: Footprintbibliothek "/home/johu/Projekte/e-umbau/kicad/Nissan-Leaf-Gen-3-Adapter-Board/V0.0.4/Footprints" nicht gefunden. Footprintbibliothek "${KICAD_LIB}/JLCPCB/JLCPC...

Now continuing with some more gate driver research. The isolators are ISO7421 from TI. https://www.ti.com/product/de-de/ISO7421 They have one forward one reverse channel. Traced the 6 forward channels that gives me the 6 gate drive signals and the 6 reverse channels give me the 6 desat signals. The ...

Success stories make us happy

Thanks very much for writing this up - again.

If anyone feels harassed let one of the admins know. We can flag a warning and ultimately ban people who suck energy off the creative crowd.

To whoever thought it was a good idea to be rude: Chop wood if you have a bad day.

Just drew this up for a customer so thought I might as well post it here. Pain: you have no VCU and no CAN communication with the inverter but want to limit throttle for whichever reason. Solution: limit max throttle output voltage with a shunt reference (or Zener, but they are less predictable I th...

Sound like a cause for failure? No, 5V pins are on many other connectors. Can you please attach pictures directly to your post (attachment in Full Editor). When I click these imgur ones I only see a blank page plus they tend to vanish. This explosion looks a bit like you fed 12V into one of the ULN...

Great! Let us know how it went

serh270 wrote: ↑Tue Apr 09, 2024 5:02 pmISSUE #1

Gain=0 and x*0 is 0 Make Gain=1 and you'll get your data

In the diagram it looks like you're feeding 5V to Foccci? This is not necessary
The CCR might be redundant as the driver chips are quite strong, lets say 5A total contactor current (limited by reverse protection diode)

How would that be possible? On your photo it looks correct plus I doubt you can mangle a 16-pin header into 14 holes

You're indexes are off by one and you're decoding big endian. Try this