Thank you for the links. Makes total sense now. I ordered a programmer and should be updating shortly. Other hurdle is the ebay super charger looks to be bad. 400vdc setpoint but only getting an output of 170vdc and measuring 125vdc at the pins. Guess that's what I get for buying the cheapest charge...

Some of the Supercharger units are Rev C - and they don't work. Purchased two Rev K chargers - and they both work! We will now be up to 27kW of charging capacity for our next race! Curious, do they not work because they are super charger scrap or because of the rev C? I have a local seller with a r...

I unfortunately paid $250 for a super charger version from ebay before seeing this. Using the v5 board I am getting 125VDC from each module.

Typing 75 into notepad copying and right clicking in the putty terminal is working. I type q to exit and save. Unplugging the usb cable to power off and plugging it back in and reconnecting over serial, 13A for AC current greets me again! Step by step... 1 - Auto Enable : ON 2 - Modules Enabled : 12...

1 - Auto Enable : ON 2 - Modules Enabled : 123 3 - Can Mode : Master 4 - Port Type : 1 5 - Phase Wiring : 1 6 - DC Charge Voltage : 400.000000 0V 7 - AC Current Limit : 13A 8 - CAN0 Speed : 500.000031 0 a - Can Debug : OFF b - EVSE Debug : ON t - termination voltage : 400.000000 0V q - To Quit Menu ...

Hi, hoping I can get some help with setting up my V5 board. Somehow I must have fat fingered and hit 8 and now to can settings are not matching what I'm seeing others post. Typing 8500 doesn't seem to restore them. Also trying to change the current by typing 75 doesn't work. Settings Menu 1 - Auto E...