Hi All.

Finally got the motor today, so going to get cracking on taking off the bits I don't need.
I couple questions I hope you can help with:
1. Which water pump do I need to use? I believe there are two in the AZEO engines?. I'm going to installing a small motorbike radiator with a fan of sorts ...

Hi,

Looking for a complete wiring loom for Resolve EV.

Thanks
Chris

I'm looking to purchase 48 Gen 2 Nissan leaf modules (24kwh pack). The battery pack has been split, so it's just the modules, which suits me fine as I need to build battery boxed etc..
What charger do people recommend to keep the modules charged up while I do all the work? It's going to take me a ...

I’m not wed to the Resolve - just seemed like a easy plug and play, but will end up using what will work

The 2013 only has 4 bars, so only good for 50km as it is. Probably ok for most of the driving I do, but just has this newer one come up, so investigating options..

Hello Again,

I have a opportunity to pickup a 2019 leaf motor and 62kwh battery from the same car).
Having a quick look - the battery is pretty heavy. Is there a way i can use less modules to decrease the kwh and also the weight?
Still looking to use the Resolve controller with everything else ...

Been doing a fair bit of reading to see which way I wanted to go with this.
I'm keen on using as much of the donor leaf I have, so most probably looking to use a Resolve Controller.
I'll be looking to pull the motor stack out, and also drop the battery. Is there anything else I should be pulling out ...

Hi,

In Australia, looking for a Resolve controller if anyone is selling?

Thanks

.

Hi All,

This is my first EV conversion project. The car is a Australian designed and manufactured 1968 Country Buggy.
The running gear is a beetle pan and swing axel gearbox, it has reduction hubs on the rear wheels from a VW Kombi (this was original and added for ground clearance).
About a year ...