Success - with fslipspnt set to 1 and boost set to 2800 the motor spins at about 10rpm.
Thank you both for your input.
Michael

I have a Gen 3 Prius Inverter and Mitsubishi Outlander Rear motor/gearbox which I am trying to get to the open loop spin stage before starting on FOC tuning. Electronics isn't my strong suit, but I have been helped by a friend who is experienced. The board is installed in the inverter and we got a P...

I'm hoping to be in the same position as you somewhere down the track, but my project is FWD, which will no doubt add complication! I'd be interested to know where you found the third party axles (I'm in Sydney). I have a part number for the third party Inner CV joint only, made by GSP: 601548 (I've...

I previously put myself down for 12 modules, but am now up to 36, or maybe 48 modules.

If any of the Aussies are interested in shipping together, I have and an indicative freight cost to Sydney, and happy share that.

We would need an MSDS I'm guessing that must be available?

Michael

Hi I'm new here, but interested in 12 modules - depending on the feasibility of shipping to Australia.

I think there may be other Aussies who are looking at shipping as a group?

Michael