Probally want to update the 0x1DC limits to the ones form a gen 3 log like below. image.png These values are currently hardcoded in the Zombie code image.png Im Hoping to get some logs this weekend but in the mean time im going to change 0x1dc as suggested- is it just byte [1] I need to change or [...

All, I’d like to drive 1 if not 2 model servos off the VCU. Can this be done directly without any extra hardware using the existing board? I can see 1pwm output for driving an oil pump but can it be coded for servo 50ms operation? If you’ve done this then huzzar! can you throw me some bones on how i...

Hi,
Have you managed to progress your project any? asking for a friend…

I have a couple of sets of the G1 26ah cell and the G2 34ah cell packs, the wiring looks similar between the two brick types but is bump polarized on the connector to stop plugging in an inappropriate module either way, I dare say you can remove the connector shell as this is easy to do, but I didn'...

Hi Guys. I have a 2020 mini e that has had body damage...due to the car being repaired and not charged the EV battery is now flat and wont charge from the charging socket. So i have this to strip and charge up the battery. Can anyone help me with any info please on how to charge these cells up. I u...

Strange things happen. From looking at your pictures it's oriented 90° to how it would normally be, right? What are the chances that an air pocket ends up stuck up top? I'd be surprised if cool temps threw a limp mode. Yes, I have pondered that as well. putting in an air bleed at the now 'top' of t...

No, I havnt done any logging yet but an hoping get some can and zombie logs at our next race day which is about the only time I can test things properly with it being fitted to a boat. I hear the comment about cooling but the stack is being fed from the stock race raw water pump that pumps water out...

Hah, goes opposite direction vs temp so definitely needs new profile in fw and maybe the 1K2 resistor is OK anyway. First can I say how appreciative of the amazing work everyone is doing in this thread. I can hardly wait to get my hands on a production example! Not wanting to clutter the thread, Im...

https://github.com/crasbe/ZombieBuild will help with the VCU firmware building and also OI. Be aware and changes you make could result in unexpected behaviour, obviously. Thanks for your help on this BP, can you tell me where I might find a source of stdint.h and its associated mates? there appear ...

Anyone use this engine with Zombie Verter? I'm running into issues with Firmware only being for Gen1, not the Gen2 I’d be interested to hear if ur still experiencing the same or have worked round it? I’m having a problem where after a couple of miles the inverter slows me down to a crawl for a min ...

I just followed the instructions on Damien's GIT page and it all initialised OK. Its also might worth noting that the ISA shunt and the BMW S-Box seem to spit our similar and conflicting messages that upset the Zombie so don't run them together on the same CAN bus. I only did so on my test rig but t...

Allright, I've hacked around with various code formats over the years, BASIC, DOS, BATCH, VB et al, I can probably hold my own at a Noobs convention and hack my way across the open plains of coding but FFS what development environment, what programme do i need to install on my PC to hack about with ...

thanks for the help, Ill get a can logger and run a scan on the bus...

code help required for wringing the most out of the 160kw inverter... // Requested torque (signed 12-bit value + always 0x0 in low nibble) if(final_torque_request >= -2048 && final_torque_request <= 2047) this is a snippet from the Zombieverter repository that is compiled into the current li...

There are enough people out there using these modules and lots of speculation on what they are capable of but little real world data I'm running at 3.2v min 4.1 max 200A continuous in recent drag race style running i operated with a 2P 34ah pair of packs on max 4.2 min 2.8 - ((this was a bit mute t...

[WIP][FIRST DRIVE / FUNCTIONAL] We have been working on a record attempt electric boat. BMW hybrid packs, Nissan Leaf, Zombieverter. We took it to the famous Coniston Records week and achieved a certified 82MPH. I would of liked a little more but we learned a lot about attempting electric records an...

Hi, Any update on your project? please let us know!

Ill take 12 if its still on?