Hi (sorry for cross posting)
to repair a leaf 62kWh battery, I need for one of the internal modules, the central one that is a 4s3p of 2.5kWh.
Code is of the module is: 95B9-4NP9C
Possible location in EU.
Let me know,
tnx, Ginetto
Search found 13 matches
- Tue Mar 12, 2024 11:37 pm
- Forum: Classifieds
- Topic: Look for leaf 62kWh module C (4s3p)
- Replies: 1
- Views: 206
- Tue Mar 12, 2024 11:36 pm
- Forum: Nissan
- Topic: Look for leaf 62kWh module C (4s3p)
- Replies: 0
- Views: 187
Look for leaf 62kWh module C (4s3p)
Hi
to repair a leaf 62kWh battery, I need for one of the internal modules, the central one that is a 4s3p of 2.5kWh.
Code is of the module is: 95B9-4NP9C
Possible location in EU.
Let me know,
tnx, Ginetto
to repair a leaf 62kWh battery, I need for one of the internal modules, the central one that is a 4s3p of 2.5kWh.
Code is of the module is: 95B9-4NP9C
Possible location in EU.
Let me know,
tnx, Ginetto
- Sat Oct 28, 2023 2:42 pm
- Forum: Nissan
- Topic: EM57 ZE1 motor, last connector pinout question
- Replies: 11
- Views: 4964
- Sun Oct 22, 2023 7:55 pm
- Forum: Nissan
- Topic: EM57 ZE1 motor, last connector pinout question
- Replies: 11
- Views: 4964
- Sun Oct 08, 2023 7:31 am
- Forum: Nissan
- Topic: Nissan leaf battery active cooling
- Replies: 7
- Views: 3786
- Thu Oct 05, 2023 7:54 am
- Forum: Nissan
- Topic: Nissan leaf battery active cooling
- Replies: 7
- Views: 3786
Re: Nissan leaf battery active cooling
Planning on using a 40kwh pack from a 2018 (or newer) leaf, do you guys think it's worth cooling the battery box? Eg putting a fan on one end to blow cooler air though the box for pre fast charging? or cooling down when stuck in traffic in the summer? Here a "risky" solution using AC air ...
- Tue Jun 13, 2023 3:42 pm
- Forum: Nissan
- Topic: EM57 ZE1 motor, last connector pinout question
- Replies: 11
- Views: 4964
- Wed Jun 07, 2023 10:26 pm
- Forum: V2x
- Topic: Commercial v2g/h unit internals
- Replies: 10
- Views: 6745
Re: Commercial v2g/h unit internals
Just received my used indra v2g device that I suppose not able to use in v2g because outside UK. Do you have any detailed teck info about the PRE v2g500 inverter model? I can find only this short document: https://www.chademo.com/wp2016/wp-conte ... asheet.pdf
- Mon Jun 05, 2023 10:50 am
- Forum: Nissan
- Topic: EM57 ZE1 motor, last connector pinout question
- Replies: 11
- Views: 4964
Re: EM57 ZE1 motor, last connector pinout question
I found harness and wiring diagram fo ZE1 PM with your email to sent it or better allow admin to attach a larger file (20MB) Hello, I have a ZE1 Leaf stack, with complete wiring (fortunately). The connector at the end of the signal wires looks like this: image.png Can you please help me showing the ...
- Thu Mar 16, 2023 8:49 pm
- Forum: Charging
- Topic: BMW i3 CCS/charge port controller
- Replies: 1198
- Views: 4820551
- Sat Nov 05, 2022 11:08 am
- Forum: Charging
- Topic: BMW i3 CCS/charge port controller
- Replies: 1198
- Views: 4820551
Re: BMW i3 CCS/charge port controller
Hi guys, just wanted to ask if anybody used a Duosida CCS socket with a LIM and got it working? I read through the thread and a lock seems to be a must. By lock is it meant the Type2 socket lock on the top as in the photo? If so it is rather high profile has anybody seen any smaller versions of the...
- Wed Nov 02, 2022 9:34 am
- Forum: Charging
- Topic: BMW i3 CCS/charge port controller
- Replies: 1198
- Views: 4820551
- Tue Nov 01, 2022 3:18 pm
- Forum: Charging
- Topic: BMW i3 CCS/charge port controller
- Replies: 1198
- Views: 4820551
Re: BMW i3 CCS/charge port controller
It works! On ABB chargers at least. Tested on two different ones. On Efacec it stops after some seconds of actual charging. But investigating... I made a log... Thanks everyone involved! That's my next step after upgraded my 2016 leaf to 62kWh battery with Dala's firmware and can bridge. I've alrea...