Great to see! You´re welcome
I don´t mind at all, if I can contribute I'm just happy.

Ok, here's the list!

36638-0002 CMC header connector 48pin 1pc
64320-1311 CMC receptacle 48pin 1pc
64320-1301 CMC wire cap 1pc
64323-1039 CP terminal 4pcs
64323-1029 CP terminal 32pcs
64325-1010 CMC plug 8pcs
64325-1023 CMC plug 4pcs

This is my version of inverter connector, based on Molex parts. First I tore the original connector apart IMG_2118.JPG Then I soldered the wires to the new connector. After that it was time to try to fit the new connector to the inverter, I used the old connector and cut it flush. IMG_2119.JPG Then ...

Darn! Should have checked that list too... Thank you!

Recieved my VCU today (thanks Damien!), I have one question already, which enclosure should I buy? I tried a search but only came up with the section that´s already there, or maybe the VCU gets too hot inside those small enclosures and that´s why the part number isn't written with the Molex connecto...

Nice testing, I have also bought one unit for use in a conversion.
Did you have cooling connected? If no, do you think that there could be an increase in power if the unit is cooled?

The battery is 292,8V nominal with 26Ah = 7613Wh. Lithium-ion. From 2020 I think I have read that the battery will increase to 10kWh within the same dimensions, I have not yet seen one though.