Hi, I managed to get the ISA shunt initialized and working. I modified my CAN BUS adapter and connected just the transceiver to the CANTX and CANRX port.
Thanks for the assistance.
Search found 5 matches
- Thu Mar 07, 2024 2:56 pm
- Forum: Projects
- Topic: ISA Shunt With ZombieVerter VCU [FINISHED]
- Replies: 14
- Views: 9091
- Tue Mar 05, 2024 8:58 pm
- Forum: Projects
- Topic: ISA Shunt With ZombieVerter VCU [FINISHED]
- Replies: 14
- Views: 9091
Re: ISA Shunt With ZombieVerter VCU [FINISHED]
Hi, I managed to get hold of a Arduino Due and CAN-Bus board with MCP2515 chip. Which pins on the Arduino Due do you use for SCK, SI, SO & CS?
- Mon Mar 04, 2024 8:27 pm
- Forum: Projects
- Topic: ISA Shunt With ZombieVerter VCU [FINISHED]
- Replies: 14
- Views: 9091
Re: ISA Shunt With ZombieVerter VCU [FINISHED]
Yes both powered on at the same time. I will have to get hold of an Arduino Due and CAN Shield. I have not really worked with the Arduino products before... Can i use any CP2515 CAN Bus module with the Due or does it need to be the CAN-BUS shield?
- Mon Mar 04, 2024 4:25 pm
- Forum: Projects
- Topic: ISA Shunt With ZombieVerter VCU [FINISHED]
- Replies: 14
- Views: 9091
Re: ISA Shunt With ZombieVerter VCU [FINISHED]
I have tried both CAN1 and CAN2 with the same results. I have also run the initializing procedure multiple times and I have the 120Ohm termination resistor connected on X2 of the ISA shunt.
- Sun Mar 03, 2024 7:21 pm
- Forum: Projects
- Topic: ISA Shunt With ZombieVerter VCU [FINISHED]
- Replies: 14
- Views: 9091
Re: ISA Shunt With ZombieVerter VCU [FINISHED]
Hi, I please need assistance with the readings I am getting with the ISA Shunt on the ZombieVerter running version 2.04A? It seems to initialize correctly and readings fluctuate with random readings even with udc connected to 12vdc or 0vdc. udc -83886.06 V udc2 486539.25 V udc3 67108.84 V deltaV 637...