Excellent work!
And a motivating video!

Thank you both very much
for this clear and detailed information!

This reassures me and bring me further.
It fills up some holes in my knowledge and confirms my presumption.

Some questions about regeneration for my comprehension only, fictional no real case. 1. In a hotel at the top of a Mountain in the Alps I load accidentally the Battery up to 100%, then I drive 30km down the pass to the valley. - Do I have motor braking? - Where do the current go? - Will this damage ...

I hope this helps you further...

In between I create the components new and solved the problem for my layout.

And Isaac fixed it for the openinverter-layout.
Thanks Isaac!

Hi Folks, at the silkscreen of the SDU Board (LDU is the same) I found that the symbols of the 0805 Resistor have two filled narrow rectangle. The same symbols are in the Gerber data. But they are located on the inner part of the lands. Usually the manufacturer first print the solder resist layer, t...

Hello,

watch this:



in some of the short episodes are answers of your questions.

cheers,
Peter

Hi Jaanus, thank you for your engagement!

I am interested in 60 modules.
And can pick them up in Germany if possible.

Hi Shane,
it's not easy to find place for the battery (your last video).
Is there place for the inverter at the place of the old Gearbox?
So you have more room to play with, in the back...
And what is with the old Fueltank, 64L more?
Happy Easter!
Peter

Hi Damien, can you do me a favour and make a raw drawing/video (L x W x H x D) of the dimensions of the 2 Model 3 DriveUnits. Ony for a rough placement check. Thank You very much! Peter Until we have received a 3D Scan crowdfunding, I will politely asked again, if somebody can tell me the dimension...

Thats all I found, possible this can help... ;) https://www.pntpower.com/wp-content/uploads/2018/06/Model3-inverter-e1530096423831.jpg https://image.slidesharecdn.com/yolesp18413-stmsicmoduleteslamodel3invertersample-180625154617/95/tesla-model-3-inverter-with-sic-power-module-from-stmicroelectronic...

Hi Damian,
maybe this pictures helps you a little bit in your exploration...

can you do me a favour and make a raw drawing/video (L x W x H x D) of the dimensions of the 2 Model 3 DriveUnits. You might be interested in this crowdfunding for a 3D scan of both motors... would save Damien or myself from doing the work and provide a much more accurate result :) 3D scan will be ...

Hi Damien,
can you do me a favour and make a raw drawing/video (L x W x H x D) of the dimensions of the 2 Model 3 DriveUnits.
Ony for a rough placement check.
Thank You very much!
Peter