Thanks Johannes!

Hello, for my Tesla powered speedboat project I would like to use the boost charging capability of the SDU inverter. I already have the motor spinning, low voltage only, using the Openinverter logic board. I have read some comments already about this item, but one question still remains; does it mat...

Ok, please send a new one. Thank you! I will return the one I have now.

Hi, I removed the board from the inverter and reconnected it to the 12v power supply. Now I measure a constant 3.3V near the eps32, for example on the right side of R59. Unfortunately it still does not appear in the wifi list.

Thanks for your help. Currently busy with other things, but will follow up soon.

Now I measure 3.0V on the 3.3 rail and 4.0V on the 5V..

Looks like the voltage fluctuates between 2.8 and 3.3 V. But I will try to do an other measurement later today.

No, it does not show. I tried several devices. I only connected 13 and 19.

Hi, my name is Frederik and I am new to this forum. I recently purchased a SDU logic board and am unable to access the wifi. I have already shorted L3, but no succes.
The board shows one constant LED and one blinking.
What can I do next?
Thank for your help! Best regards, Frederik