Search found 33 matches
- Thu May 09, 2024 12:14 pm
- Forum: Tesla
- Topic: Tesla Charger Support thread gen2/gen3
- Replies: 5
- Views: 800
Re: Tesla Charger Support thread gen2/gen3
Is there a way to use the Tesla OBC Gen 3 for fast charging??
- Tue May 07, 2024 4:41 pm
- Forum: Projects
- Topic: The SuperYacht BMW E65 7 Series
- Replies: 227
- Views: 45272
Re: The SuperYacht BMW E65 7 Series
can i use the e65 configuration on my e60 ??
i thing is the same can messages
i thing is the same can messages
- Tue Apr 16, 2024 4:57 pm
- Forum: Vehicle Control (VCU)
- Topic: Reverse light over can ??
- Replies: 0
- Views: 533
Reverse light over can ??
Hi, I have a BMW E60, how can I activate the reverse light via can when engaging reverse gear? I installed the Tesla LDU, I also have the zombieverter here
- Tue Mar 05, 2024 7:32 pm
- Forum: Inverters / Motor Controllers
- Topic: with or without (C18,C19) [SOLVED]
- Replies: 1
- Views: 1506
with or without (C18,C19) [SOLVED]
What are the two capacitors for, some boards have them, some don't (C18, C19)
- Thu Feb 29, 2024 10:29 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
I think there is still an bug in it, if I install the stm32 firmware, then I no longer have WiFi, if I delete the firmware again, WiFi is available again immediately OK, I changed that uart_config_t uart_config = { .stop_bits = UART_STOP_BITS_2, and that uart_read_bytes(INVERTER_PORT, &c, 2, UAR...
- Thu Feb 29, 2024 9:32 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
I did that, but no data comes from the controller
- Thu Feb 29, 2024 8:09 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
Unfortunately I don't know how to do that, I don't know enough about Arduino
- Thu Feb 29, 2024 1:05 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
I have removed everything related to SD card, now i have wifi and can open the web interface,
but now I don't have any values, probably deleted too much in the code, unfortunately I'm not familiar with it
but now I don't have any values, probably deleted too much in the code, unfortunately I'm not familiar with it
- Wed Feb 28, 2024 8:16 pm
- Forum: Vehicle Control (VCU)
- Topic: Driving with canbus
- Replies: 7
- Views: 780
Re: Driving with canbus
oh my god, wenn das nur auf Deutsch wäre
- Wed Feb 28, 2024 4:11 pm
- Forum: Vehicle Control (VCU)
- Topic: Driving with canbus
- Replies: 7
- Views: 780
Re: Driving with canbus
This no longer works starting v5.32.R! See above!
So it no longer works that you can start the drive direction or the inverter via canbus???
So it no longer works that you can start the drive direction or the inverter via canbus???
- Wed Feb 28, 2024 12:25 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
I think the esp32, just stop there, unfortunately I don't know why
- Wed Feb 28, 2024 11:29 am
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
I was also wondering why an SD in a controller board, but I think the firmware should be universally applicable
- Wed Feb 28, 2024 11:09 am
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
It looks like sd_mmc is causing problems
I've now commented out that part, but it just doesn't continue- Wed Feb 28, 2024 1:37 am
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
if i make e full clean and erase flash, and then i make a build, then it looks like this Screenshot (250).png If I build again, it will look like this Screenshot (251).png then the upload works Screenshot (252).png then upload the filesystem Screenshot (253).png on the Serialmonitor looks like this ...
- Tue Feb 27, 2024 10:02 pm
- Forum: Vehicle Control (VCU)
- Topic: Driving with canbus
- Replies: 7
- Views: 780
Driving with canbus
Can someone give an example of how I start the inverter via canbus, or switch the direction D N R, would like to install a nextion display, which I use to control the whole thing??
- Tue Feb 27, 2024 11:02 am
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
there is nothing in it
- Tue Feb 27, 2024 10:40 am
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
that looks all good
- Tue Feb 27, 2024 10:26 am
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
Unfortunately it doesn't work either
i have testit on a programmer, but the same
- Mon Feb 26, 2024 10:05 pm
- Forum: User Interface
- Topic: change the IP
- Replies: 2
- Views: 528
Re: change the IP
I have the big problem on my esp32, that the firmware doesn't work, I don't have wifi (https://github.com/jsphuebner/esp32-web-interface) but with this Firmware (https://github.com/Bedz01/esp32-web-interface-port), i have wifi, but no web interface, only when I access the wifisettings aka 192.168.4....
- Mon Feb 26, 2024 5:20 pm
- Forum: User Interface
- Topic: change the IP
- Replies: 2
- Views: 528
change the IP
Hi,
where can I change the IP in the code from 192.168.4.1 to 192.168.8.1 on the esp32 web-interface ??
where can I change the IP in the code from 192.168.4.1 to 192.168.8.1 on the esp32 web-interface ??
- Mon Feb 26, 2024 9:30 am
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
I have now ordered new ones with the updated layout, but still the same as before, no wifi, I uploaded the unchanged code from https://github.com/jsphuebner/esp32-web-interface, what is going wrong here? 20240226_102128.jpg but with this https://github.com/Bedz01/esp32-web-interface-port, i have wif...
- Fri Feb 23, 2024 3:29 pm
- Forum: Vehicle Control (VCU)
- Topic: controlling tesla water pumpes
- Replies: 0
- Views: 413
controlling tesla water pumpes
Can I control the Tesla pumps via the VCU ??
- Fri Feb 23, 2024 1:12 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
I have an ESP32-WROOM-32U-N8, could that be the problem??
- Wed Feb 21, 2024 6:09 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
that didn't work for me, no wifiroyhen99 wrote: ↑Wed Feb 21, 2024 5:58 pm That version does not work fully. Use this one https://github.com/jsphuebner/esp32-web-interface
- Wed Feb 21, 2024 5:46 pm
- Forum: User Interface
- Topic: what am I doing wrong ??? ESP32 flashing
- Replies: 41
- Views: 2447
Re: what am I doing wrong ??? ESP32 flashing
Hi, the module wasn't defective after all, now the wifi is also displayed, but I can only call up the wifi setting, it doesn't find all other files like index.html, I used the following, what could be the reason, and uploaded them I use platformio The only thing I changed is the IP address, from Scr...