Getting this board made up at moment,
And batman chip placed on it, so can swap between porotype boards
Then hopping to look at reading data once I get some hardware

JLCPCB have this transformer in stock : https://datasheet.lcsc.com/szlcsc/YDS-13F-39MNL_C115949.pdf Any thoughts on compatability? @Jack Bauer - How did you get on using that alt part for ISO SPI chip ? (Did it work ok, or we best to keep to first one) I'm just about start discovery on coms, Got a ...

Found the issue, was using wrong frequency with CAN messages So when inverter turned on it classed and killed all the messages on the bus But worth a note to make sure you have correct can terminators when start going longer distances. For this one I manged to just go shield to inverter plug with ou...

Hi, Im playing about with a Nissan Leaf Gen1 And want to see if can direct connect to CAN on the Leaf inverter and watch & send messages. Got two uno sending happy between then selves using CAN module. But when I power up the inverter, then I start to get CAN send error on the uno And not seeing...