Thanks!
I’ll go back to 5.27 and adjust params when its time to start using car when spring and warmer weather is back.
I drive an 2010 Volvo V50 D2 when I cant use the Electric Audi so I really start to miss the little beast now
/Mattias

Thanks! Prblm solved! Changed to sin file. Testrun showed very smooth in low acceleration but cutoff probably overcurrent not letting me go hard on throttle. Changed back to 5.20
Any parameter changes needed to be able to run 5.27?

Help! 5.27 uploaded to v.6 tesla sdu board. Before upload (5.20) I also activated hillhold and changed idlethrottlim from 50 to 60. After cycle off/on my parameter set is different…I dont have parameterset started with -Motor-> 0 boost 1 tweak … As soon as I activate drive inverter clicks and overcu...

I’ll check leaf pump👍 Got an diy alternative found in vw hybrid and electric cars with 19 mm tubes otherwise 2 models that could work from davies craig called boosteroump. First one dellivers 25lit/min and a more powerful version with 27lit/min with a pump outlet pressure of 0.85 Bar for just under2...

Johannes was spot on! Waterpump not flowing enough or have given up and tempsensor far away from inverter fooled me. Indicated 24 deg celcius on guage is much more deg in inverter. Long but gentle driving and first full pull day after then charger heating water and inspired drive from start lead not...

Build was started many years ago with a Kostov DC motor. Then I found this community by a friend so no buildthread. Everything and more is found on my Instagram Audia2electric. If ok by moderator otherwise remove.

The Tesla motor makes this car fly! I just love it

Thanks Johannes! I will change and raise value, but car and coolant was low temp since charging only was active until lunchtime so it only indicated 20 ish degrees celcius (I have installed an watercoolant guage) The highiest indicated temp have been 42 deg celsius after a longer drive for approx 30...

Hi! Just completed my conversion and have been driving my converted Audi A2 for 2weeks. Im in heaven! Thanks to open inverter community that makes it possible to use a Tesla motor! Im running R sine 5.20 and almost unchanged values from dellivery of my v6 board from Johannes. The car felt almost per...