I want the opposite, I have 5 x chademo 50kw dbt chargers that are Chademo only. Maybe next winters project.
If anyone seriously wants to have a go at making the reverse of this they can have one of these dbt units.
Phil
Search found 36 matches
- Sat Jan 27, 2024 9:26 am
- Forum: Charging
- Topic: Is it possible to make a CCS to CHAdeMO adapter?
- Replies: 71
- Views: 52612
- Sat Apr 23, 2022 5:16 pm
- Forum: Renault
- Topic: Renault Zoe BMS
- Replies: 48
- Views: 17062
Re: Renault Zoe BMS
OK so solved that somewhat. Thanks to paaa I used one of the can logs and found that it wakes up and starts sending data when I send 0x423 and then stops again after the log is turned off. Now to work out what everything means..
Phil
Phil
- Sat Apr 23, 2022 4:32 pm
- Forum: Renault
- Topic: Renault Zoe BMS
- Replies: 48
- Views: 17062
Re: Renault Zoe BMS
OK so I have the battery connected to a power supply, it pulls almost 300mA for a few seconds and then drops to 35uA. No data is transmitted on the canbus. Now I am hoping it wakes when it is sent some can data.
Phil
Phil
- Fri Apr 08, 2022 10:47 pm
- Forum: Renault
- Topic: Renault Zoe BMS
- Replies: 48
- Views: 17062
Re: Renault Zoe BMS
Did anyone ever get one of these BMS working from what I can see the BMS looks the same in the Kangoo. I just got a few Renault Kangoo EV batteries which are 36.4 kwh and any information would be useful. I did find this : https://docs.google.com/spreadsheets/d/18woe2h8rAPiIrajOFWiqMwfQRpsZ1lIqdOhpm9...
- Wed Mar 23, 2022 10:55 pm
- Forum: Jaguar
- Topic: Ranger rover 14.7kwh pack bms
- Replies: 12
- Views: 16515
Re: Ranger rover 14.7kwh pack bms
Found this - viewtopic.php?f=26&t=1179
Now I am happy.
Thanks again for the info, because of the conformal coating on the chips it is almost impossible to read the text so you helped alot.
Phil
Now I am happy.
Thanks again for the info, because of the conformal coating on the chips it is almost impossible to read the text so you helped alot.
Phil
- Wed Mar 23, 2022 12:50 am
- Forum: Jaguar
- Topic: Ranger rover 14.7kwh pack bms
- Replies: 12
- Views: 16515
Re: Ranger rover 14.7kwh pack bms
OK thanks for that. Pity they didn't just stick to can bus.
Phil
Phil
- Tue Mar 22, 2022 9:28 am
- Forum: Jaguar
- Topic: Ranger rover 14.7kwh pack bms
- Replies: 12
- Views: 16515
Re: Ranger rover 14.7kwh pack bms
I am not sure if the bus to the modules is can bus, the lines from the controller seem to be isolated using some transformers. You can see them on the bottom left of the square pcb photo. There is also no can transceiver chip on the individual bms boards that I can see. I will have to get a scope ou...
- Tue Mar 22, 2022 1:55 am
- Forum: Jaguar
- Topic: Ranger rover 14.7kwh pack bms
- Replies: 12
- Views: 16515
Ranger rover 14.7kwh pack bms
Has anyone got the Samsung bms working for the rangerover packs?
They are 12s 37Ah and there are 9 of them.
Phil
They are 12s 37Ah and there are 9 of them.
Phil
- Tue Dec 28, 2021 12:45 pm
- Forum: Charging
- Topic: Weightlifters charger 11kW (Tesla Gen2 based CHAdeMO charger)
- Replies: 8
- Views: 2969
Re: Weightlifters charger 11kW (Tesla Gen2 based CHAdeMO charger)
Whereswally606 the Renault charger uses the motor inverter and motor as part of the charger so it's not practical or compact.
- Tue Dec 28, 2021 12:29 pm
- Forum: BMW
- Topic: BMW ZF GA8P75HZ Gearbox Hacking
- Replies: 18
- Views: 10752
Re: BMW ZF GA8P75HZ Gearbox Hacking
There is a product just about to be released to control the none hybrid 8hp bmw gearboxes using the original tcu using can and bypassing the immo. No plans to cover the hybrid version as yet but he might if there is enough interest. https://www.canformance.net/shop/
Phil
Phil
- Mon Apr 27, 2020 11:21 pm
- Forum: Mitsubishi
- Topic: Outlander rear motor and inverter
- Replies: 319
- Views: 678997
Re: Outlander rear motor and inverter
Seems to behave pretty well using a full throttle map I mocked up. I hope to be testing it under load in the civic this week. I just know I will be wishing I fitted the outlander front transmission with both motors when I drive it..
Phil
Phil
- Sun Apr 26, 2020 10:21 pm
- Forum: Mitsubishi
- Topic: Outlander rear motor and inverter
- Replies: 319
- Views: 678997
Re: Outlander rear motor and inverter
The rear inverter is programmed with the vehicle vin and it is transmitted continually. The phev ecu will not drive the inverters if the vin from the rear inverter does not match so it is partly correct.
Phil
Phil
- Sun Apr 12, 2020 11:51 pm
- Forum: Mitsubishi
- Topic: Outlander rear motor and inverter
- Replies: 319
- Views: 678997
Re: Outlander rear motor and inverter
I have a motor, inverter, charger and battery from an outlander installed in a Honda civic. The charger and motor only need 4 can commands between them in total to work. I have shared the information with a couple of people on here already. But I will be in a position to report actually driving a ca...
- Sat Apr 11, 2020 7:41 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
Oh and yes it charges to 420v You should be able to stop and start the charge by sending 0 current then it will start again no problem As you have probably noticed the 370v set in 0x286 has no effect that I can find whatever. In fact if you send 1v it will still charge, however if you set those byte...
- Sat Apr 11, 2020 7:37 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
Doesn't work until about 210v from memory.
Phil
Phil
- Fri Apr 10, 2020 11:33 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
Yes I got the inverters and charger working a few months ago, pretty simple set of can bus commands. I am building an ep3 civic type r with an outlander rear motor mounted in the front using the outlander inverter, charger and batteries. I know its a serious power downgrade but I had the car already...
- Tue Apr 07, 2020 10:31 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
If you take the cover off it says P N on the pcb next to the connections.
The connection nearest the edge of the case is P.
Phil
The connection nearest the edge of the case is P.
Phil
- Tue Apr 07, 2020 8:58 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
I never tried a resistor, always had cells connected via the original contractors and precharge
Phil
Phil
- Tue Apr 07, 2020 6:39 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
No a fixed value works just fine.
I already have an outlander motor and inverter mounted in a ep3 civic type r just for testing purposes. Hopefully I will be able to drive it by this time next week.
Phil
I already have an outlander motor and inverter mounted in a ep3 civic type r just for testing purposes. Hopefully I will be able to drive it by this time next week.
Phil
- Tue Apr 07, 2020 10:48 am
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
You only need to send 0x285 and 0x286 0x285 alone will connect the evse but won't charge until you send 0x286 0x286 byte 2 sets the charge current, there is a voltage setting on byte 0 and 1 but that is completely ignored I am working with someone at the moment to provide a solution to make all the ...
- Mon Apr 06, 2020 11:42 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
The charger fully controls the charge rate from a single byte in a can command but the maximum is overridden by the pilot signal pwm setting.
- Mon Apr 06, 2020 11:36 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
No the pilot signal goes straight to the charger.
Phil
Phil
- Mon Apr 06, 2020 7:03 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
0x38A, 8, temp, temp, input bus voltage, pilot pwm duty (plain in decimal), charger status
If that makes sense
Phil
If that makes sense
Phil
- Thu Apr 02, 2020 11:08 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
I actually did not test it without a battery, I was a little concerned about the voltage spiking and damaging something. I would be much further on this project but I have been recently been swamped with business changes caused by the coronavirus due to supply from China and also making my own venti...
- Tue Mar 31, 2020 9:13 pm
- Forum: Mitsubishi
- Topic: Mitsubishi outlander charger and DC:DC
- Replies: 353
- Views: 113353
Re: Mitsubishi outlander charger and DC:DC
I have had it working on the bench with a very rough setup, I am making a controller to do it properly and will release the information once I am not sending people on a road to nowhere as there is also some of the electrical connections to the charger that need handling.
Phil
Phil