Thanks for the replies! Will upload them and tune after that!

Hi!
Is it anyone who can share a working set of parameters for the LDU sport unit?
Im quite new at tuning and Im looking in to getting a little head start

Thanks in advance!

Hi! Im trying to make a working gauge cluster via obd2 and the app torque. It has a function for "HPEV Motor RPM" but that doesnt give me any read out. I feel kind of lost in the CAN-jungle, what do I need to do in the inverter to get orion bms to read the RPM? The CAN speeds are set to th...

Hello Everyone! I have been searching around but cant find anything so I will ask. As per law here in Sweden you have to have a emergency stop button inside of the car. As I know you can blow the inverter if pulling the contactors while driving. So that is a big "NO". My other thought was ...

You can change the regen settings to work all the way down to stationary, it may or may not work smoothly, but worth a try. You should also experiment with the hill hold function, but I haven't been able to make it work myself. A few improvements probably need to be made to openinverter's low speed...

Doh! You need to have a pedal range without torque near 0 so motor would not lock your wheels before stopping. Very dangerous in winter. I use a single pedal throttle even though i use a regen pot. This regen pot i can actively set but it remains on that setting. When i release throttle motor will ...

Hi! Is it anyone that has played with regen and achived one pedal driving? I would like it to work but when I tried I couldnt get the regen to work under like 5kmh. Under that the car was free rolling, I would like to have it so the car actually stops and can even hold the car at stand still on a sm...

Boxster EV wrote: ↑Wed Aug 31, 2022 1:06 pm Ground both (same as neg terminal on battery).

Thank you, will do!

Stupid question maybe, but whats the difference between pin 11 "Systems Ground (Chassis)" and pin 22 "Systems Ground"
Can I run both to chassies, or should pin 11 go to chassis and pin 22 to minus on 12v battery?

Best regards!

Hi! Tried to search here but didnt find anything, I may be stupid but rather one question to much than on to little. Pin 11 Says "System Ground (Chassis)" Pin 22 Says "System Ground" Is there any difference to these? I feel like both should be to the chassi of the car? Or should ...

great answer, thanks!

Hey Guys!
Was searching the threads here and couldnt find a answer to my question. Does anyone know if it it safe to run 108S on a Tesla large drive unit?
And can the evbmw controller board handle it?

Best regards!
/Joachim Westerlund

aah, I see. But if I only aim for Quick charge on open charging stations? Does that work? If you wish to use the Orion BMS then you'll need to ask them. However, a much better way forward IMO is to use the SimpBMS ( here ) which will eventually support the open CHAdeMO ( here ) and open CCS ( here ...

aah, I see. But if I only aim for Quick charge on open charging stations? Does that work?

Hi! Im new here and I have some questions. Im sitting with a P90D rear DU, my plan is to use the board for it! And that part is clear :) But my question is regarding the charger, I saw that the charging board was capable of hadling supercharge(and thats what Im going for). What socket do I choose fo...