This guide from Thunderstruck EV might be of use. http://www.thunderstruck-ev.com/images/companies/1/CanTranslatorGuideAll-20210330.pdf?1617208046029 After installing, take the following steps to upload the data file into Torque Pro. These steps are based on an Android tablet at ThunderStruck (other...

I already had a USB CANdapter, used for programming Orion BMS, but I recently picked up an Adafruit Feather M4 CAN Express and also an RPI2040 CAN Bus Feather to play around with. I decided to install CircuitPython on the boards purely because I'd never used it and wanted to give it a try. Got both ...

Hello, I have a Tesla SDU with the Openinverter board installed but have been following development of the Zombieverter with great interest. Would it be possible to have the Openinverter board control the SDU as normal but also have a Zombieverter onboard to control everything else such as coolant p...

Hello, I just wanted to introduce myself to the forum and give a bit of information about my planned project. My name is Lee and I'm based in the west of Scotland. I've got a 2000 Boxster 986 and plan on putting a Tesla SDU in it. After buying a Leaf I got hooked on EVs and really fancy something sp...