I purchased the motors for the advertised specs. They are actually rated at 200kw apiece at 600volts. I have all the data, including CAN protocol. You will not find any outside support. I contacted manufacturer and supplier directly, they will not provide any information or support. We are kind of ...

Hi, I am also interested in purchasing a couple of these motor as well for a land speed project that I'm working on, have you had any luck with getting any more information on how to operate these motors.

Hi after twelve months final have the the little red race car ready for this years pilgrimage to Speed Week Down Under, interested in the set up for the controller, are you using the standard set up or have you changed any of the parameters to get more out of the motor, I'm looking for the highest t...

Hi Nesto, I have done all the similar tests that you have done with similar results, haven't been able to find a problem so far. Interesting point on your settings I see your tmphs = 0 mine is reading 25*C which is the ambient in my workshop and changes during the day/night, your tmpm = 190*C and mi...

Thanks for your response.

What tests can l conduct on the current sensors other than a visual.

Can you provide more info on how and where to fit the hvil disable jumper during testing.

Cheers

Hi, I think I may have found my problem.
On the motor parameters at "din_ocur" I have "Error" not sure how that has occurred as the motor hasn't seen any current yet from low voltage testing unless it is a problem that came with the motor.
How do I reset the "Error"

Thanks mate for the info much appreciated.

Hi, trying to test run my SDU on the bench, prior to putting it into the Solar Corolla for this years pilgrimage to Speed Week in AUSTRALIA at the end of March, unable to get the main contactor to close, have changed the parameters for the low voltage test, the main contactor come in and chatters as...

TSDU Brake Pedal Position Sensor, where can i source one of these.

Can some please confirm the following, on the TSDU low voltage diagram; Pin 5 shows forward direction in black is this a positive or negative supply Pin 12 shows reverse direction in blue is the a positive or negative supply because on the TSDU 12 volt connection diagram Pin 5 shows forward directio...