This one converts 02 BMWs to SDU. Unfortunately, there are few pictures or data.
https://www.bavarianecons.com/
Search found 579 matches
- Sun May 12, 2024 8:46 am
- Forum: Projects
- Topic: [WIP] BMW E6 - 2002 Touring
- Replies: 7
- Views: 751
- Sun May 12, 2024 8:43 am
- Forum: General
- Topic: Suitable battery packs for ECE R100
- Replies: 3
- Views: 186
Re: Suitable battery packs for ECE R100
I don't know where in Europe you live. In Germany, the box does not have to be certified, but only approximately correspond to the r100. More details can be found in the VDTÜV 764 leaflet. Felton sells a box for use in the engine compartment, I don't think it's R100 certified, but it looks well made...
- Tue May 07, 2024 4:33 pm
- Forum: Getting Started
- Topic: where to pass TUV in Germany
- Replies: 40
- Views: 12246
Re: where to pass TUV in Germany
I wonder where 1988 comes from. The RL 72/245/EWG is valid from 72 and was changed in 1995 by the RL 95/54/EG. From then on, it applies not only to vehicles with spark ignition, but to all vehicles.
- Sun May 05, 2024 8:00 am
- Forum: General
- Topic: Axle Removal
- Replies: 15
- Views: 1471
Re: Axle Removal
Do you have a limited slip differential from Quaife? In my case, the shafts slipped too deep into the differential so that the spring was not in the right position and the shafts could no longer be removed without destroying the spring. I then made spacer rings to limit the travel.
- Sat Apr 20, 2024 12:20 pm
- Forum: Tesla
- Topic: Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
- Replies: 492
- Views: 344376
Re: Tesla Large Drive Unit (LDU) Motor Teardown and maintenance
Does anyone know what happened to howardc64?
- Mon Apr 08, 2024 6:44 pm
- Forum: General
- Topic: Axle Removal
- Replies: 15
- Views: 1471
Re: Axle Removal
This the axle flange that was left over from my mecedes drive shafts.
- Mon Apr 08, 2024 4:32 pm
- Forum: General
- Topic: Axle Removal
- Replies: 15
- Views: 1471
Re: Axle Removal
I made this for myself!
- Sun Apr 07, 2024 8:12 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 424
- Views: 32844
- Fri Apr 05, 2024 11:06 am
- Forum: Charging
- Topic: BMW i3 CCS/charge port controller
- Replies: 1205
- Views: 5827949
Re: BMW i3 CCS/charge port controller
the meaning of the 2 bits (16+17) is:
00 Not plugged in
01 Plugged in
10 Error
11 Signal invalid
the meaning of the next 2 bits (18+19) is:
00 Button not pressed
01 Button pressed
11 Signal invalid
only for type 1
00 Not plugged in
01 Plugged in
10 Error
11 Signal invalid
the meaning of the next 2 bits (18+19) is:
00 Button not pressed
01 Button pressed
11 Signal invalid
only for type 1
- Sun Mar 17, 2024 5:15 pm
- Forum: Projects
- Topic: [WIP] L322 RR Vogue - The beached whale
- Replies: 133
- Views: 231850
Re: [WIP] L322 RR Vogue - The beached whale
did you see that? https://www.ebay.de/itm/285744978081?itmmeta=01HS6PF8CN3P3BT0WEEQ0HC39P&hash=item4287ba58a1:g:7eYAAOSw5vVl5JrP&itmprp=enc%3AAQAJAAAAwJ4g6spmZN7ZVkxfBoA4v%2FEaeYAcMe5v06yDVk4jy021kWJisozpC%2FYiifrN4N95R448dHMezUhV07FieFWiS5AQhMTAM1nET3Fww11FQwcNcWRf%2FGMhi0AjvfSDGo7oMjL%2FzX...
- Sat Mar 16, 2024 2:33 pm
- Forum: Charging
- Topic: BMW i3 CCS/charge port controller
- Replies: 1205
- Views: 5827949
Re: BMW i3 CCS/charge port controller
You should receive the necessary information from the LIM for the maximum current from 3B4h. With 3E9h you have to transmit the charging status to the LIM so that it controls the LEDs and locking etc. correctly. And a signal, e.g. byte[7] = 0x2A to 51Ah to prevent the LIM from going to sleep. It may...
- Tue Mar 12, 2024 9:49 pm
- Forum: News
- Topic: Electrify Your Ride - new conversion guide book
- Replies: 35
- Views: 9481
Re: Electrify Your Ride - new conversion guide book
Crimpen was always a German word and was only adopted by the Americans
- Sat Mar 09, 2024 3:32 pm
- Forum: Events and Meetups
- Topic: Linux-Infotag Augsburg 2024
- Replies: 11
- Views: 1171
Re: Linux-Infotag Augsburg 2024
Cool, bei mir ums Eck. Of course I'll come by and get to know the famous UHI.
- Sun Feb 25, 2024 7:26 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
One more try, then I'll test whether it works with 400V!!!!!!!!!
- Sun Feb 25, 2024 6:09 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
After further attempts it now looks like this:
- Sun Feb 25, 2024 8:32 am
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
this happens when I press F5.
- Sat Feb 24, 2024 7:57 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
the internet connection seems to be working. When I click on OpenInverter Forum in support I end up in the forum.
- Sat Feb 24, 2024 7:50 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
in most things I see the mask, in WIFI SETTINGS everything is just white!
- Sat Feb 24, 2024 7:47 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
now it's a little different. At the bottom left corner it says firmware : null /web : v2.1 and I can't select a node id.
- Sat Feb 24, 2024 7:38 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
yes, the interface is visible, but no parameters and with the error message like in the picture.
- Sat Feb 24, 2024 7:01 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
- Sat Feb 24, 2024 6:49 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
what I have done: I downloaded the ZIP file from GitHub and unpacked it into a folder. I have VSC and the platformio extension installed. In platformio.ini I changed the 3 lines and entered the correct IP address. Then I opened a new terminal window and changed to the unpacked directory and entered ...
- Sat Feb 24, 2024 5:54 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
what are spifs?
- Sat Feb 24, 2024 3:11 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690
Re: interface problem tesla sdu with esp32 canlite module
I tried to install the latest software, but now it doesn't work anymore. The connection works, but I get the following message. CAN.png I downloaded the ZIP file from here and changed the 3 lines in the .ini. https://github.com/jsphuebner/esp32-web-interface/tree/can-backend platformio ran through a...
- Thu Feb 22, 2024 4:35 pm
- Forum: User Interface
- Topic: interface problem tesla sdu with esp32 canlite module
- Replies: 27
- Views: 1690