Thanks man! Sorry bout the late response. The build went well.I got busy with other projects, but when I had it dialed in I raced it around! You got plans for your AC24? Thanks for your interest take care.

Awesome bike project!!! Good luck!!!!

I wanted to post my progress converting a Kawasaki Teryx 750 to all electric. Still have some work to do but I have the wheels spinning and Rev2 tuned....some what :) Driving the rear wheels but hope to in the near future add a front motor and have 4 wheels spinning.
My set up
Batteries- LG Chevy ...

Okay I understand now ....I didn’t realize the outputs were open drain in active low.I had my led anode tied to open drain when anode should of been connected to vcc via resistor.I was thinking in active low the outputs were open collector and floating at Vcc.Thank you Mr. Huebner for your help.

So what I have been doing is while inverter is stopped I change pwmpol parameter to Active low then store parameter using store button.I then start inverter by pulsing start at 12v putting inverter into Run Mode also tested in Manual Mode.When I give the inverter throttle I have no PWM on channels ...

I have a power stage that utilizes Active low. If I change pwmpol setting to active low it doesn’t change state of PWM. PWM channels seem to still be low at idle when they should be high. Parameter comment states setting needs PWM restart.Silly question but how do you PWM restart... and turn on ...