Is it possible to make this test software a .bin file so it can be uploaded to the STM32 in the same way as the main software for consistency and help us non programmers?

Thanks

Ok finally have success.

This seems to be a Arduino build compatibility issue. Loaded Arduino 1.8.0 on a different laptop and used ESP board core 2.6.2 and have successfully loaded sketch and spiffs to both NodeMCU and Olimex mod board.

Well i'm not getting anywhere with this. It seems the Arduino IDE is not loading the spiffs. Has anyone sucessfully done this with a recent build of the Arduino IDE? I found some info about spiffs no longer being supported by the ESP8266 core https://arduino-esp8266.readthedocs.io/en/latest/filesyst...

Ok tried it on a Wemos Node Mcu Lolin and it is the same. must be something i'm missing. Had a play with the ino code to see if I can debug. Changed the 2 "file not found" messages to "filenotfound1" and "filenotfound2" Now i'm getting a file not found 1 message when I ...

Yes Matt, I'm Connecting to the ESP wifi Via my iphone.

If I just try going to 192.168.4.1 without changing wifi I get site cannot be reached errors so definitely on the ESP.

Are there any files I've missed in the SPIFFS load?

FS Browser2.PNG FS Browser.PNG This is the output screen from Arduino IDE. Sketch uses 356800 bytes (34%) of program storage space. Maximum is 1044464 bytes. Global variables use 28496 bytes (34%) of dynamic memory, leaving 53424 bytes for local variables. Maximum is 81920 bytes. esptool.py v2.6 2....

Thanks for your reply Matt. I have a Olimex Mod board and been trying to program with the Arduino IDE . I've got the boards loaded in the IDE. I've connected the board to USP-TTL as per instructions on page 1, moved solder bridge to 0. Created folders with ino and data. as per arbers instructions on...

UPDATE: After trying the available memory size options, I finally got everything to load!!!! Sill "FileNotFound" @ 192.168.4.1 however... UGH :( Yet ANOTHER update..... SUCCESS!!!!!!!! :D I have the same issue. Using Olimex Mod and Arduino IDE to flash. All seems to go ok but on the 192.1...

This is normal operation without the short in place.

Been following this with interest.
I have been playing with scoping current using Pico scope and 3 phase current clamps.
This is a Gen 3 inverter with 2 MG2 phases shorted together, the peak current before it shuts down is very interesting.

Hi All, I'm David,from South west England. I teach EV and hybrid repair to Vehicle technicians. My background is electronics and 30 years dealer and independent Automotive workshop. Been following Damien's adventure for a couple of years now. Would love to build a few projects to demonstrate on cour...