Search found 391 matches
- Wed Sep 20, 2023 7:24 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
I think maybe this thread had it mentioned? Maybe I read about it being reason for the cell12? when I was browsing for solution to my problem before posting it. But I can't remember where it was used or anything. BTW, opened up the 10S and 8S CAN Modules covers to measure voltages from board to rule...
- Wed Sep 20, 2023 7:06 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
My bad, I forget the fact that the E-Golf has 10S modules, let me tweak my code and upload for you to test. The filtering is to keep starting modules and messages for empty voltage from messing with things. New one here: https://github.com/Tom-evnut/VW-bms/tree/master/VWBMSV2 THANKS TOM ! now it wo...
- Wed Sep 20, 2023 6:38 pm
- Forum: Nissan
- Topic: Leaf Gen 1 Inverter Board
- Replies: 319
- Views: 185961
Re: Leaf Gen 1 Inverter Board
oh crap, but now you have a good reason to buy newer inverter with more power then? allthough still sucks.
- Wed Sep 20, 2023 6:33 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
Please create a can log of connecting Module #8, so the 4s + 4s. this is required due to the way it powers itself. Once this shows correct data, connect the final section. I get the feeling something is weird about the wiring setup causing errors in the module voltage reading. Have you connected th...
- Tue Sep 19, 2023 9:31 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
So there is some more checks for plausible values being sent by modules, you log is showing 0x1CC, 0x1CD, 0x1CE as are expected for module 8 but all with 0xFF or 0xFE for cell voltages or translates to not correct cell voltages. The modules messages are discarded if they are shown as 0xFF in any of...
- Tue Sep 19, 2023 7:34 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
OK, I have a problem that I cannot solve; I am using original old SimpBMS hardware, the software version is from 11.03.2023 https://github.com/Tom-evnut/VW-bms/commits/master/VWBMSV2 VW BMS V2 problem item: Module #8 (CAN module 4S+4Sdumb+2Sdumb total 10S) I have 12S(module#6) and 10S(module#8) conn...
- Tue Sep 19, 2023 8:03 am
- Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
- Topic: E Golf Battery pack
- Replies: 78
- Views: 24422
Re: E Golf Battery pack
I have a small issue: Module #8 was bench tested and working as a 10S group CAN module before. I have a screenshot from SimpBMS to verify that. Yesterday I plugged in CAN modules 5/6/7 and 8 (With the cell interconnect wiring for their respective cell Groups.) The module #8 is not Sensing/sending vo...
- Sun Sep 17, 2023 11:23 am
- Forum: Projects
- Topic: [Driving] Freelander EV With Gen1 Leaf electrics and EVBMW VCU
- Replies: 265
- Views: 398444
Re: Freelander EV With Gen1 Leaf electrics and EVBMW VCU
As Celeron55 has stated:
'Use proper CAN wiring and termination - the inverter makes a considerable amount of electrical noise."
So the vcu might indeed be to close to source of that noise.
You have twisted pair cables on CAN wires in this car too?
'Use proper CAN wiring and termination - the inverter makes a considerable amount of electrical noise."
So the vcu might indeed be to close to source of that noise.
You have twisted pair cables on CAN wires in this car too?
- Tue Sep 05, 2023 4:47 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
Can this type of contactor be used on 12V switched output?
VW 3Q0915646B
Non Economiser Type Current Draw 0.556A@12.8V
VW 3Q0915646B
Non Economiser Type Current Draw 0.556A@12.8V
- Tue Aug 29, 2023 7:51 am
- Forum: Battery Managment (BMS)
- Topic: Switched ADC BMS
- Replies: 185
- Views: 38709
Re: Switched ADC BMS
Hi, I had shop tab for BMS in browser waiting for right time to order but now realized shop says product not found, is the early adopter version gone now?
- Wed Aug 16, 2023 2:17 pm
- Forum: General
- Topic: Is a Leaf BMS OK with the Battery being split in the wrong place?? [SOLVED]
- Replies: 13
- Views: 14370
Re: Is a Leaf BMS OK with the Battery being split in the wrong place?? [SOLVED]
OK stupid suggestion time. What if the connections going to the BMS either side of the proposed break at cell 56 were passed through a relay so that with the ignition off the pack is broken to the BMS but when the ignition is turned on they are connected again. Provided they were timed such that th...
- Wed Aug 16, 2023 5:56 am
- Forum: General
- Topic: Is a Leaf BMS OK with the Battery being split in the wrong place?? [SOLVED]
- Replies: 13
- Views: 14370
Re: Is a Leaf BMS OK with the Battery being split in the wrong place?? [SOLVED]
When you are driving/charging the pack is complete and BMS works. No problem there. When car is parked and batteries split, there should be no consumption and no real need for the BMS to stay alive? I plan to cut off all power when my car is parked. Including the BMS. What would it do anyways when b...
- Sat Aug 12, 2023 6:49 am
- Forum: Projects
- Topic: [Driving] Freelander EV With Gen1 Leaf electrics and EVBMW VCU
- Replies: 265
- Views: 398444
Re: Freelander EV With Gen1 Leaf electrics and EVBMW VCU
Good to see your progress. Taking some notes too. And not stressing so much because I see it can be done like this and this and this too. Thanks for sharing.
- Thu Aug 10, 2023 2:52 pm
- Forum: Projects
- Topic: [Driving] Freelander EV With Gen1 Leaf electrics and EVBMW VCU
- Replies: 265
- Views: 398444
Re: Freelander EV With Gen1 Leaf electrics and EVBMW VCU
Oh dear not looking forward to my wiring mayhem, but this looks time consuming as can be.
- Mon Jun 19, 2023 4:34 pm
- Forum: Nissan
- Topic: Leaf Gen 1 Inverter Board
- Replies: 319
- Views: 185961
Re: Leaf Gen 1 Inverter Board
Has anyone made forward/reverse switch for the leaf vcu?
Edit: ok I just made a code that changes torque request to negative when IN2 is high. Seems to work just fine (full speed reverse though like this, so maybe I will make a software limiter)
Edit: ok I just made a code that changes torque request to negative when IN2 is high. Seems to work just fine (full speed reverse though like this, so maybe I will make a software limiter)
- Tue May 09, 2023 7:15 am
- Forum: Charging
- Topic: Chademo Controller Development
- Replies: 511
- Views: 97875
Re: Chademo Controller Development
Just a quick update for everyone, @royhen99 has been working with me via PM to sort out a solution, and I do have CHAdeMO charging working on my car. We're still sorting out a few gremlins at certain chargers, but we're close to a functional version of the FW. That's good news, congrats! Thank you ...
- Fri May 05, 2023 12:03 pm
- Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
- Topic: VW Golf GTE battery
- Replies: 32
- Views: 12917
Re: VW Golf GTE battery
I have an opened battery pack that still has the modules in it etc. I only cut out the contactor 12V and GND cables from the loom.
Looks like this:
I also have unopened pack. And a connector for the external CAN bus
What would you want checked?
Looks like this:
I also have unopened pack. And a connector for the external CAN bus
What would you want checked?
- Thu Mar 16, 2023 6:00 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
Hi, it appears the outlander charger has just been added to github five days ago by jamiejones85, big thanks ! There was 1 error in the ino file while I was compiling it: case 7: SERIALCONSOLE.print("Pylon - TESTING ONLY"); break; case 7: SERIALCONSOLE.print("Outlander Charger");...
- Fri Mar 10, 2023 7:23 pm
- Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
- Topic: VW Golf GTE battery
- Replies: 32
- Views: 12917
Re: VW Golf GTE battery
I've got a second pack to play with. I've been able to get the contactors to close from the hybrid can thanks to some logs from DomT177Screenshot 2022-02-18 at 7.57.07 pm.png This is the pinout of the external connector. To close the contactors 0x09C & 0x3A6 are needed on the hybrid can. 0x3A6 ...
- Fri Mar 10, 2023 4:30 pm
- Forum: VW (VAG, Volkswagen, Audi, Porsche etc.)
- Topic: VW Golf GTE battery
- Replies: 32
- Views: 12917
Re: VW Golf GTE battery
I am trying to figure out the 0x09C , I have found many counters on the capture "HybridCAN Key ON", and also something worth noticing..? This is all of my notes: Data Byte 0, I have no idea, random value, a checksum? total of 0x09C? a value? has allmost all values between 0x00-0xFF __ BUT ...
- Thu Mar 09, 2023 5:39 pm
- Forum: Charging
- Topic: Chademo Controller Development
- Replies: 511
- Views: 97875
Re: Chademo Controller Development
Not sure if I have v2 or v3, I'll open up the enclosure and check when I'm working on the car this weekend. No need to open for V2 /V3 check. If it is STM32 thenyou see from outside too. If you have 12 + 20 pin connectors it is V2 If you have one 35pin connector it is V3 Edit: they should be essent...
- Thu Mar 09, 2023 9:58 am
- Forum: Projects
- Topic: [DRIVING] The Audi 8e - Powered by Leaf
- Replies: 146
- Views: 68308
Re: The Audi 8e - Powered by Leaf
Nice to see how this comes along. I might copy something too
- Wed Mar 08, 2023 5:31 pm
- Forum: Charging
- Topic: Chademo Controller Development
- Replies: 511
- Views: 97875
Re: Chademo Controller Development
I will PM it to you. I can put in on here or GitHub after testing. I have set chgcurlim default to 125A, and chargetarget default to 25A. Great that we have more people interested in getting these boards to life. Thank you! I'm using the ISA version of Damien's dedicated CHAdeMO controller. Its on ...
- Sat Mar 04, 2023 9:09 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 265197
Re: Simp BMS
Is there an Outlander charger working code for the original SimpBMS? I found this: https://github.com/jamiejones85/VW-bms/blob/master/VWBMSV2/VWBMSV2.ino But it says it's for a modified board, I have old unmodified SimpBMS from @tom91 for VW from the time there was no balancing. I want to update the...
- Sat Mar 04, 2023 8:09 pm
- Forum: Charging
- Topic: Chademo Controller Development
- Replies: 511
- Views: 97875
Re: Chademo Controller Development
ISA Shunt CAN communications working with the ISA FC VCU V2 (STM32) ISA_FC_VCU_V2_with_ISA_8.62V_RC-CARlipo.jpg Using RC car lipo balance plug and dupont cables to test :mrgreen: (little offtopic, other board, LEAF VCU (DUE) doesn't show the voltage for some reason, but it also receives the 0x521 t...