Hello ! Just popping in to give a quick advice. You wrote in your first post you need a throttle pedal, however you already have the perfect pedal in the GT86. It's pinout is similar to the popular Prius throttle pedals. Therefore, it's compatible with the Zombiverter VCU. In fact, every* Toyota ele...

I am referring to the pin number on the circuit board. What I was suggesting is that you check that there is 5V being generated on the board and that is is getting to the pin on the connector ( the one soldered to the board). Hey, I took the 56 pin connector out, only plugged 12V and ground, and me...

The THROTTLE1/2 inputs effectivly have 2Kohms to ground, so even with a good 5V supply the 50K pot will have most of is adjustment close to one end. Looking at the spec of the Curtis pot it is 5K which is still a little high but should work. The two Bosch pedals I have are less than 2K. Not sure wh...

Hi, This is my very first post on this forum, although I've been reading from the shadows for a while now. Thanks for having me. Consider me a complete beginner. Context I bought a fully assembled ZombieVerter VCU (shipped with v1.01.A, now upgraded to 1.11.A). I'm doing the most simple bench test w...