problem solved was wrong syncofs value.

ok i will do syncofs calibration process renewal

I finally decided to use a Toyota inverter. The engine is already spinning, responding to gas thanks to the help of Pete9008 . I uploaded the settings from the college Bigpie https://openinverter.org/forum/viewtopic.php?p=53764#p53764. The engine started spinning, but I have a problem because after ...

Tomorrow I start work on connecting the engine to the gearbox using elements taken from the outlander differential and the peugeot clutch plate.

Due to the weather, the work is progressing very slowly, I try to do something, but only when I have free time or when it rains or snows. Let this spring come

I prepared the pinout in the mini-e VCU board described here
viewtopic.php?t=2167
maybe it will be useful to someone, I'm just asking someone who has experience with this board to check if I made a mistake.

The plate arrived today https://oshwlab.com/aot93/mini-e-t4-vcu_copy. I assembled it so there is already a whole set for trials and tests in the workshop IMG_0834.JPG I've already collected the rest of the Outlander stuff IMG_0828.JPG Time to start testing. If everything fires up, I'm getting ready ...

when the weather is not conducive to work on the car, I solder a zombieverter

Thanks, just wanted to confirm that I'm thinking right

I have a question, do I think correctly that this is how the poles of the battery wires should be connected? This is the rear inverter from the outlander

I have another question. are all the parameters displayed in the web interface described somewhere? I will ask for a link.

thank you very much for the hint. change "snshs": 1 i.e. "semicron" helped. I am very grateful for your help

When I run it, I get the error [18] DERATE-TMPHSMAX. The small_dual_v1d board has the latest soft stm32_sin loaded, only the gas pedal from BMW is connected.

Yes I saw it but there is bms from outlander and I have i-miev and there are big differences when reading data and that's why I'm looking for a solution for i-miev

I have a question, I have already ordered and programmed the Prius-Gen3-Inverter-master, IMG_0807.JPG I want to connect it to the outlander's rear engine, IMG_0810[1].jpg I also bought batteries from the i-miev. IMG_0812[1].jpg My question regarding connecting these batteries does the cat have a rea...

Today I managed to buy probably the last piece of teensy 3.2 for little money. And now I have a question. I want to use Clipboard02.jpg https://oshwlab.com/aot93/mini-e-t4-vcu_copy to control the inverter from outlander and as bms Clipboard03.jpg https://oshwlab.com/aot93/simpbmsminimal the question...

More items have arrived. motor and inverter to it. Now I'm wondering whether to use the toyota yaris board or, on the contrary, leave it for another project and make the control using the software and driver from https://github.com/aot93/Mini-E-VCU. Are there any step by step videos on how to do thi...

Does anyone on the forum have a reworked version of the Mini-E-VCU for the arduino compiler for teensy 4.1. Can you send me this version?

OK thank you for the information

ok like that

I have a question for people with more experience than me. Below I have compiled the connector from the dual_v1d board and the resolver from the outlander rear drive unit, is this connection correct?

the board is already alive after programming I did everything step by step like this friend on YT

Work is progressing slowly, waiting for the outlander's engine, I'm disassembling the internal combustion engine. Due to the cold and snow, there is not much going on IMG_0777.JPG Finally, the assembled boards have arrived from jlcpcb. I am starting to assemble the connectors removed from the yaris ...

As for the use of the gearbox from the Toyota Yaris, I thought about it, I even bought it, but the problem with the speed sensor, additionally, the modification of the driveshaft, making the gearbox mounts, all these additional works prompted me to use the outlander drive. The only thing I need to a...

I understand, I will try to follow your advice. I will probably have a lot of questions, but for now I am waiting for the jlcpcb boards are already produced, I am just waiting for the shipment. I have already managed to program the ESP8266. I have such a walking question about connecting the resolve...