It was easier for me to use a fixed delay between messages. In a car, the power task command is sent only when the power changes, not in a cycle.
See the original trace: https://drive.google.com/file/d/1lnnsRz ... share_link

Heater photo

Hi! I had to write down the log from the Chevrolet Volt. I did it! Catch the working code. Repeat each message every 350 ms, 500 ms is already starting to fall asleep. Only this answer is interesting: 0x1047809D YY XX XX 00. If YY = 00 - everything is ok, YY = 92 - there is no high voltage. XX is so...

Would you like to share response messages you'll get from the heaters? Damien verified Zombieverter heater code works. I might have timing issue in my code which I found while trying to get Mitsubishi heater to work. I have read these heaters have tend to fail, but got no more info on response mess...

evMacGyver, my trace is following: 04,321410 1 0005 13FFE09D 0 04,346816 1 0005 13FFE09D 0 04,365504 1 0005 1047809D 3 00 00 28 04,415623 1 0004 63E 8 01 40 00 00 00 00 00 00 04,475601 1 0005 1047809D 3 00 00 42 05,544957 1 0005 13FFE09D 0 06,744887 1 0005 13FFE09D 0 07,945982 1 0005 13FFE09D 0 09,1...

Hello everyone! I have been trying to run two liquid heaters from Chevrolet volt 1 for a long time. I found one startup instruction and two projects for a microcontroller on github. I use CAN Hacker to send commands via SWCAN, this is a USB-CAN device. I send commands the first time after powering o...