Perfect, I will pull a CAN log shortly and post it. Apologies in advance for the spam. Edit: I hooked up a Arduino nano with the Rst and Gnd jumped intern making it a serial adapter using the FTDI chip. I hooked It up to Conn9 Gnd to Gnd Rx to RX Tx to TX 5v to 5v And the board did not power up. I r...

Yes, the Can jumper is soldered and I have verified it is a good solder joint.

A bit more information. The board is not outputting any of the required voltages on connector A. No "OUT2 - AC present" on pin A1, in other words. A6 has nothing either. Thanks, in advance, for any suggestions you can offer. I am also experiencing the same situation. The control board is ...