Great news !

Jack Bauer wrote: ↑Thu Jun 23, 2022 6:54 pm Sure. Will be in touch in a week or two to arrange.

Hello ! Can you tell me when can I send you a charger?

The main board should have 2 leds. One on sold marked 3v3 and one blinking at 10hz marked "accty". The wifi module should also have two leds. One red on always indicating the module has power and the other flashes green at powerup indicating the module receives data from the stm32 on the ...

https://github.com/damienmaguire/Tesla-Model-3-Charger/tree/master/Controller/V3 Hello ! I concluded that my chargers have the wrong firmware with a modified DBC, could you read the firmware of your working charger? Or tell me in which direction I should move, I purchased 6 US chargers and none of ...

Photos..

Hello !
I use stm32 version v2 board with commercial firmaware (demo version for 5 minutes) made by JLCPCB (US version PCS) and have some error bits.
errbits0_2 8 (PCS_a032 unused I think)
errbits1_0 577 (can't explain this errors)

Can you explain this errors for me ?

Hello ! I can't get firmware for Model 3 charger from https://openinverter.org/shop/index.php?route=product/product&product_id=67 Link doesn't work: https://openinverter.org/files/stm32_pcs.zip Can you help me ? Do not think it has been released yet because it has not been fully tested, if some...

I bought board on JLCPCB

Hello ! I can't get firmware for Model 3 charger from https://openinverter.org/shop/index.php ... duct_id=67
Link doesn't work: https://openinverter.org/files/stm32_pcs.zip
Can you help me ?

Hello ! I can't find design files for V2 tesla model 3 PCS - can you help me with this ? Also I can't find this design files on Patreon..

I'll check firmware between two power modules. There are two processors on the board - TMS320 F28935 from TI and Programmable Logic ALTERA 5M160Z E64A5N - I think all CAN addresses present in TI microcontroller. Can you recommend any hardware for download firmware from it ? There are connectors on t...

as i said there is address conflict from two modules because one module is from another charger (i have two chargers with two modules in each, one module I had replace into another box - and I have three phase charger :D ) As I said "it's probably easier to get a 72A charger" :) Thank you...

Yes, I use V4 board with GEN3 charger. Charger is GEN3 48A with only two modules. I don't use EVSE, I have direct 3-phase AC input and use 's' console command for starting charger, but as i said there is address conflict from two modules because one module is from another charger (i have two charger...

Hello ! I have 48A GEN3 charger with only two modules inside - can I add yet one module from another charger for three phase installation ? I use V4 logic board, but when i connect all three modules I can see reply only from two modules - i think this is inner address conflict from two identical mod...

Hi ! I want to buy a printed circuit board for Tesla Charger GEN2- is it the fourth version?

Yet one question.. Can I use gen2 logic board for gen3 charger (with any manipulation) ? Given they use the same software why not compare the schematics and decide whether you can cope with the hardware differences? Clearly, this is all I wanted to know so as "not to step on the rake". Th...

Yes, thanks, I'm in the know. But I want to do it myself. Maybe this is unrealistic, I just want to try. Great! I'd recommend you start with CHAdeMO because more of that information is in the public domain. Here's the JLD505 software used by various car side development efforts; https://github.com/...

That's right, I did not want to redo the car. Initially, I meant an external charger. OK, so the answer is yes you *can* do it but none of that software or hardware exists today. In a nutshell you will need both hardware and software for a CHAdeMO (or SuperCharger) charger controller that follows t...

I have one-phase Tesla from US, so for max power I need 3-phase charger at home (for equal line loading) . Also I am from Ukraine and want to have mobile 3-phase charger on the board (because Super Chargers is absent in Ukraine). Rewiring the charger in your car to support 3 phase will be difficult...

Jack Bauer wrote: ↑Thu Nov 14, 2019 1:40 pm Gen2 and Gen3 charger controllers use the same software.

Thank you!
Can I use gen2 board for gen3 charger ?
I am asking, because gen2 board is booming ! (V4 already)

1. ..... can’t find software for gen3 on github (only PCB info)
2. Can a third-generation charger be turned on in parallel to achieve fifty kilowatts?

P.S. I have a Tesla Model S P85 2013, unfortunately single-phase, and I want to do Chademo Station (or may be Tesla Super Chardger) for personal use (but of course I have no protocol information yet for charging side) I'm not sure I understand this comment... If you're trying to use public CHAdeMO ...

Hello to all ! I purchased the Tesla gen3 charger and I need advice on this: 1. I want to make a board myself, but I can’t find software for gen3 on github (only PCB info) 2. Is the board from the second generation suitable for the third generation changer ? Why am I asking - the second version boar...