Search found 92 matches

by nathaniel
Tue Feb 13, 2024 8:20 pm
Forum: Tesla
Topic: Rear SDU on foc?
Replies: 3
Views: 330

Re: Rear SDU on foc?

Thx for the fast response and explanation.
So a async motor we don't use the foc, only for permanent magnet motors?
by nathaniel
Tue Feb 13, 2024 7:53 pm
Forum: Tesla
Topic: Rear SDU on foc?
Replies: 3
Views: 330

Rear SDU on foc?

Hi, I'm working om my second conversation, because it's addictive 8-) but anyway this time i want to go a bit faster do a Tesla unit it is. I ordered a board from the shop and put it in the inverter. Everything went well and after some first testing of the basic functions i noticed that there was si...
by nathaniel
Sun Nov 19, 2023 6:59 pm
Forum: Inverters / Motor Controllers
Topic: Mitsubishi Outlander Front Inverter running openinverter, overcurrent issues
Replies: 53
Views: 7614

Re: Mitsubishi Outlander Front Inverter running openinverter, overcurrent issues

Thank you very much! It helped a lot. Tell me, what type of temperature sensor did you specify in the OI settings? does he adequately see the temperatures of the inverter and motor? ooh, by the way, I measured the resistance of the motor temperature sensor at different temperatures and an NTC 50k i...
by nathaniel
Sun Nov 19, 2023 6:54 pm
Forum: Inverters / Motor Controllers
Topic: Mitsubishi Outlander Front Inverter running openinverter, overcurrent issues
Replies: 53
Views: 7614

Re: Mitsubishi Outlander Front Inverter running openinverter, overcurrent issues

You're welcome. The inverter and motor temperature sensors are still connected to the original control board so I can read them via the canbus. But the oi has no idea what the temperature is. But I have it on a display in my dash so I keep an eye on it. The inverter never get hot and the motor can g...
by nathaniel
Sun Nov 19, 2023 8:30 am
Forum: Inverters / Motor Controllers
Topic: Mitsubishi Outlander Front Inverter running openinverter, overcurrent issues
Replies: 53
Views: 7614

Re: Mitsubishi Outlander Front Inverter running openinverter, overcurrent issues

Hi, I found somewhere on the forum or on a related GitHub from someone here but I can not find it anymore. But a have marked a copy so in the attachment you find the sheet with all the connector pinouts. But credits to the work are not for me ;)
Mitsubishi front inverter PCB pinout.xlsx
(38.34 KiB) Downloaded 64 times
by nathaniel
Mon Jul 10, 2023 2:31 pm
Forum: Tesla
Topic: Tesla Model 3 Rear Drive Unit Hacking
Replies: 635
Views: 130365

Re: Tesla Model 3 Rear Drive Unit Hacking

i'm following this topic for a while now with very high intrest, and now I could buy a m3 unit from a damage car for very low price which I couldn't resist. only 600 euro's. the car entered the workshop under its own power, so the motor is still working. so now i want to play with the inverter to ge...
by nathaniel
Sat Jun 10, 2023 6:16 am
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

In message 0x272 the status of the contactors is easily recognizable. My software automatically does a weld test if the message doesn't say ok Yes that was my idea, but the problem I have with that is at every start the cp_door status is in error. I need to cycle the door to get it to read open or ...
by nathaniel
Thu Jun 08, 2023 10:04 am
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

I have not had this issue but often need to do a weld test when the supply of the voltage sense board was off. If I keep the LIM and the sense board on I don't need to do a weld test. ooh thank you, that is very interesting. my voltage sense board is going off when my car is off. how is your door c...
by nathaniel
Sun Jun 04, 2023 8:36 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

I know I promised to share my current sensor design but I'm a bit delayed with the revision. The sensor can be more stable and I've make a new revision but I need to test it first before I want to share it. As soon as in happy with the result I share it for you guys. But in topic, in the meantime I'...
by nathaniel
Sat May 20, 2023 2:38 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

I can confirm that every CCS try until now was working perfectly, even the Tesla superchargers! And also fastnet, big one here in the Netherlands
Super happy!
IMG_20230519_183522.jpg
IMG_20230520_162246.jpg
by nathaniel
Sat May 20, 2023 5:32 am
Forum: BMW
Topic: Info on BMW hybrid battery packs?
Replies: 436
Views: 523549

Re: Info on BMW hybrid battery packs?

Hi, has anyone successfully used these with rapid charging of any sort? Especially without any form of cooling? Hi. I have the 24kw pack from the X5 but essentially the same cells but just 2 times as much. Have charged yesterday for half an hour with 60 amps so just under 1c and the cells got at ma...
by nathaniel
Tue May 09, 2023 1:58 pm
Forum: Projects
Topic: [DRIVING] triumph spitfire with mitsubihi generator as motor
Replies: 26
Views: 5196

Re: triumph spitfire with mitsubihi generator as motor

Could be either an increase or decrease, no real way to tell which. Because of the way the parameters are stored (fixed point arithmetic with a 5bit fraction) the smallest possible change is 0.031 so I'd start with that. thx, i'm going to do some testing with that. here a link to the dyno run video...
by nathaniel
Tue May 09, 2023 12:38 pm
Forum: Projects
Topic: [DRIVING] triumph spitfire with mitsubihi generator as motor
Replies: 26
Views: 5196

Re: triumph spitfire with mitsubihi generator as motor

Sounds interesting, do you think I need to increase or decrease the value and how big steps should I take? I'm very happy with the driving! A always take this car now and my normal car is collecting dust. It's no Tesla power but at the traffic lights 99% of the time I'm the quickest and with no effo...
by nathaniel
Tue May 09, 2023 11:05 am
Forum: Projects
Topic: [DRIVING] triumph spitfire with mitsubihi generator as motor
Replies: 26
Views: 5196

Re: triumph spitfire with mitsubihi generator as motor

as long as the temperature is not to high you can push more right?:) btw the motor temp was 62 celcius after 2 runs
by nathaniel
Tue May 09, 2023 10:04 am
Forum: Projects
Topic: [DRIVING] triumph spitfire with mitsubihi generator as motor
Replies: 26
Views: 5196

Re: triumph spitfire with mitsubihi generator as motor

so today i went to a tuning shop and asked if i can do a run in there dyno, so here are the results. one run in the second gear and one in the third gear, interesting to so that there are about 22% driveline losses in second gear and 16% in third gear. the run stops at a little over 6000rpm because ...
by nathaniel
Sun May 07, 2023 7:54 am
Forum: Projects
Topic: [DRIVING] triumph spitfire with mitsubihi generator as motor
Replies: 26
Views: 5196

Re: triumph spitfire with mitsubihi generator as motor

A little update on the spitfire, interieur starts to look nice again. And the main thing is that I've managed to get CCS fast charging working! With the help of this forum of course! I'm very pleased with that. IMG_20230419_175121.jpg IMG_20230506_164539.jpg IMG_20230506_164605.jpg IMG_20230502_1710...
by nathaniel
Sat May 06, 2023 6:57 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

In the next couple of days I will make a project on the forum for that. The design exist out of a couple of different boards and I want to share also what my design distortions where to give a bit of understanding how it came to be. I post a link here when I'm finished with that
by nathaniel
Sat May 06, 2023 3:27 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

Just wanted to share this with you guys, I got ccs working thanks of your help! I installed small relays that switches the big ones and that did the trick. Strange thing is that I use 30 ohm resistors because that was the only thing I had. But the LIM is accepting that it seems. Swapped the current ...
by nathaniel
Sat May 06, 2023 6:35 am
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

I haven't had time to test the relay setup but in the meantime I have an other question also regarding the AC and DC charging with the LIM. I use the LIM now also for AC charging so if I plug the cable in the LIM sends the data to to vcu and the vcu commands power and the LIM closes the plug lock an...
by nathaniel
Thu May 04, 2023 11:05 am
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

You should hear them click. Are you sure it's carried out? How is the 0x272 message behaving? The message goes to zero, during the test I can see it working in the log and is passed successfully. It was failing first so I swapped the priory on the relays, they have a diode in them. Guess it has som...
by nathaniel
Wed May 03, 2023 8:40 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

i have made a self build isa shunt based on a ESP32 because i find them to expensive, and on there a also put a DAC for this purpose. i calibrated the values but the adc misses sometimes a reading and that is what you see. it's a external adc wit opto insulation so i guess these is sometimes a timin...
by nathaniel
Wed May 03, 2023 8:23 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

Some progress, fixt the unstable init port measurement and now I come to stage 6 but fails after that. I have a log but I want to look at this first. But I don't hear the relays closing and they should be at that stage, so I think there is something there. During the weld test I also don't hear them...
by nathaniel
Wed May 03, 2023 3:19 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

one more question, in anticipation of the next step, my current sensor reads a positive value when I use current from the battery when driving, and a negative current when I charge. so when i go to charge it will report negative current to the lim, is this correct or not?
by nathaniel
Wed May 03, 2023 3:15 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

I think I have already found a hint, when I look in the code of the VCU it is checked in state 4 whether the inlet voltage is < 20 volts of the charger. when I then look at the log the value I get back appears to be very unstable, so I have to make that stable first before continuing to the next ste...
by nathaniel
Wed May 03, 2023 2:54 pm
Forum: Charging
Topic: BMW i3 CCS/charge port controller
Replies: 1187
Views: 3381513

Re: BMW i3 CCS/charge port controller

I have been helped a number of times on the forum in the journey to my own conversion project. and now I have arrived at the last part, CCS. my setup is: Zombieverter VCU(only for the LIM), BMW LIM 61 35 6 828 052, 96 cell 24kw BMS hybride pack. with the AC charging the lock works and i can do contc...