Hello

I was wondering if someone can help me with the wiring diagram of this accelerator pedal throttle position sensor.


Thanks

Does this look good:

CAN BUS:
https://youtu.be/tXaF9ynjKvg

tom91 wrote: ↑Mon Mar 24, 2025 6:48 pm Why? What are you trying to achieve.

End goal use for the drivetrain?

The inverter is not an CAN end node I believe so you cannot extend its CAN network branch by alot.

The end node is on the HVB BMS, so I believe the terminators are one on the VCM and one on the BMS..

tom91 wrote: ↑Mon Mar 24, 2025 6:10 pm What are you trying to achieve?

My current goal is to run the drive unit outside the car on my bench with the least possible amount of wires extending..

Hello guys

I have an unused Nissan Leaf 2017 and I attempted to run the drive system outside the car to do some tests for possible future conversions. I simply extended all wires of the drive system (HVB, PD module, and Inverter) to the inside of my garage with around 6.5m extended length.

The ...

Hello Damien

I don't seem to find for the Prius!


Keep up the great work, a big fan here...

Hello guys

I am working on some mods for gen3 and gen4, but I can't seem to find the wiring diagram and the repair/workshop manuals for them.

It would be greatly appreciated if someone can help here.

I've done a single phase version of it for the Gen2 inverter: https://github.com/jsphuebner/stm32-island
It uses phase 1 and 3 and also the boost converter to keep DC link voltage constant. So it requires a battery voltage lower then mains peak, say below 300V.

You need to attach quite some ...

Hello

I was wondering if anyone has tweaked Damien Prius Gen 3 Inverter Logic Board yet to run home appliances that work with 220v single phase. And what is the possibility of running a workshop with 400v 3-phase power out of the Gen 3 inverter.

Before being overly hopeful, if something like this ...