viewtopic.php?p=69998#p69998

Have found the relevant assembly information,

Looking for ZombieVerter as one word helped,

Correct... well done..

Perfect.... Thanks Greg,
Was able to go straight to the Feb 2023 video titled with Blue wifi Module. And Tap into Exactly what I need to help .

Many Thanks for the Great Complimation of Damians contributions.. I was struggling to find the right spot..to look.

My Zombieverter arrived a while ago and now that the connectors and case have arrived I've got it all built up and tested and ready to go IMG20231001154601.jpg Hi, on a search for which way up or down for the wifi board... and thank you for having this helpful picture, I guess somewhere there is in...

Thanks for helping....have the connections sorted ready for when have a Zombie board prepared. Next to assemble supplied chips, and wifi module. The Damian Maguire video I found has guidance to installing a wifi board , not the Esp one, which could be flipped over and seemingly incorrectly installed...

someone smarter than me can explain what this is for, I'm guessing some sort of interference IMG_1800.JPG Had seen that this part if the loom , transgresses over MG1 and MG2 phase connections quite closely... There is shielding screen on the phase wires also, so is belts and braces good practice I ...

thanks gregski! This feels like something that should be documented in the wiki, but where would a good spot be? update: I added it to the hardware section immediately after the prewired connector w/ leads line item unfortunately formatting is terrible because I don't really know what I'm doing Tha...

Thanks for the link, Ots the Zombie pins am presently searching for.. Your videos are very helpful thanks, look forward to it.. Had figured there must be a diagram about, my limited searching ability has found this on an old post for gs450h, Do you know if this suits for the Prius you have in the Ra...

Thanks for info, have been removing some with less sophisticated jewelers screwdriver method.

On a related track, pinout for the Zombie board, Mth, Htm, Req, and Clk etc. For use with Prius Nvw30 inverter,
Can you point me as where to locate this please.?
Thanks.

Edison version of that you have checked out and eliminated that option still stands..
I see the 2.15a version is released, hope that is the panacea for your mounts .
Also pleasing to see the 450h gear change enabled with a 7k to 2k rpm hysteris.

.... While I'm waiting for the next software update I've been getting on with .......... Did you mention something about a software update in pipeline ? Was discussing your savage throttle to a friend, at local ev mod and build group, and seemed that a rate of change factor or some other accelerato...

Yes, understood, no load and smoother control that I have is not easy, as we are torque requesting , your twitchy control, would be harder.
I wonder how difficult to progm to go temporarily to speed control, I.e. using rpm as feedback?
Like a marine set up could have. just thinking out loud.

Re the 300h usage, yes you have shown it has great performance promise.. Thanks for the drive you have put in, following a last years statement that seems someone needed to do it...😀 If you are able to measure any rpm to Amps drawn with wheels of the ground, would still be interested for comparison ...

[quote=andybpowell post_id=69807 time= the extremely harsh power delivery makes it hard to drive safely and will tear out my bushes some of the updates in the Zombie pipeline should relieve or hopefully fix this issue so I'm doing the jobs I put off while evaluating the feasibility of the 300h which...

Re: State of Rex hacking? Contemplating putting a Leaf motor in the empty engine space of the Test Bmwagon. And use MG1 to rotate the splines shaft at up to the desired say 12kw, This would check out the Thunderstruck, Leaf inverter , and Leaf motor and its regen operation, to see if the present ano...

Sorry to hear of your Oops accident.. Bother..

Great work, has put my attempted use of the Prius zvw30 inverter with the L210 sadley to rest... To be replaced with the 300h inverter, and have ordered a Zombie, to follow the path you have blazed... Again well done and thanks.. Enjoy your Zipping 3 around

Looks like hundreds, so 30 to 60mph in couple of seconds .

Helps put your earlier post in line.. about screaming and wheel spinning down the road.

andybpowell wrote: ↑Mon Apr 08, 2024 8:33 am no problem happy to help where I can

One question, the time line on the bottom, is that on tenths of a second,
looks exceptional acceleration if that is so. Thanks

andybpowell wrote: ↑Sun Apr 07, 2024 8:39 pm decent empty road is my problem I'm afraid

Yes, imagine that is a challenge.. anything approximating stable current draw , you can manage would be great, as your chart can be interpolated to suit difficult request folks like myself. Thanks.

managed to get an extra 5mph had to brake pretty hard at the end of it though I really need to get to a decent stretch of road so 70 Mph and still pulling strong 70.png :) Very Impressive, thanks for graf and graphing. Would you be able to do some stable runs at any 10mph, 20mph, 30 mph, ........et...

Yes thanks for the thoughts,
Had considered the 2 plan, leaf motor is not easy connect to present BMW engine , had a small water blast stationary motor, but figure not enough to get to the unloading limit, but would help figure out the regen not functioning.

Nice result there
Thanks for that, looks a vast improvement on the Prius Gen 3 inverter attempt, motor matching issues maybe.

Have initiated BMWagon swap to crown inverter, of matching part number, so hope to fly it soon.

Great work here, have just stumbled across your build..
For this spin up, think was a mention somewhere of changes made by forum folks.
Wondering if still using 2.05a code, or a mod to it?