Pin diagram for Nissan Leaf Precharge Relay

Holding wattage ~1.7w

I've been looking at those too, but most of the brass standoff sellers are across the pond from me. Is it important that they're brass? Off-the-shelf aluminum spacers are more easily available to me and I think aluminum is (surprisingly) more conductive than brass. I'd still be buying two different ...

I reckon I found what you mean- http://www.evbmw.com/index.php/evbmw-webshop/toyota-built-and-tested-boards/term-posts It doesn't look like there's an option to add to cart like some of the other items, so you're right about Damien not selling it seems. If it's all bolted together anyhow, maybe stac...

Never mind, I got off my lazy @$$. Here they are. For everyone's info, they are 19.8mm max diameter by 36mm (positive) or 46mm (negative) long. If anyone can make some for me (shipping to Michigan, US) DM me please

bobby_come_lately wrote: ↑Mon May 22, 2023 7:35 am 3MF files OK?

I'd prefer native 3d solids if you have them around, thank you

Can't find that one on the github. Can you post a link to which one you mean? The brass ones that bring the battery connections outside the casing, as mentioned in this post (I think). - Base plate should slot in to the rebate around the oval hole. The two brass *standoffs* then slot into this. I'm...

Does anyone have drawings for the battery cable standoffs for use with battery_connector_v2?

For anyone looking to use this, the output connector can be found on: General Motors p/n 84024993 Tesla p/n 1100169-00-D, or 110900410-G (?) Check the key of the connector, whatever part you buy. Only Key A will work!!! I’m told theres also a volvo harness with this connector, but I don’t know the p...

PM'd

Does anyone in the US have an assembled pigtail of the HV DC output connector? The free-hanging/wire side. I found one on EBay from a Volvo as mentioned by Arber earlier, but it's $700 USD with shipping. I don't have the $7k tooling from TE to make these :) . I'll buy it from you for a reasonable pr...

Thanks Arber, and yep, I have it all hooked up according to the pinouts posted a while back. I was wondering if there’s a visual indication that the charger is working. I’m getting no voltage output and the charger doesnt draw any current at 12V. As far as I can tell it’s not pulling any line voltag...

Hey, couple questions. -Do I need a HV battery hooked up in order for charging to start? Was just going to stick some multimeter probes on the end of the cable. -Is there any indication that the charger is on? I’m giving it 12v on pins 9 and 2 and it’s not drawing any current. Also, I don’t see any ...

guys im needing some help. can post on my page of the forum on my electric rx8 build. so i have a 100amp hour 47 cell li-ion preius prime plug in battery. i have re-arranged all the cells in this configuration. 47 cells, 100amp hours at 195volts dc full charge. my question, i dont have a charger an...

Evening folks. I'm having an issue with my inverter board. It was working well until I changed ocurlim from 100 to 200. I then went for a jaunt around the neighborhood, all seemed fine. When I went to drive it again later, my contactor didn't click. I traced the problem down to the inverter board's ...