Search found 211 matches
- Wed Apr 24, 2024 1:03 pm
- Forum: Battery Managment (BMS)
- Topic: Simp BMS
- Replies: 643
- Views: 227853
Re: Simp BMS
I tested this last year. Battery modules and Sbox clash on id 0x100 so can not share the same bus.
- Tue Apr 16, 2024 8:45 pm
- Forum: Nissan
- Topic: Leaf Gen 1 Inverter Board
- Replies: 319
- Views: 158997
Re: Leaf Gen 1 Inverter Board
That's what I would expect. The ISA shunt data is sent to Serial2 which is the wifi interface. To view it on the terminal you to need to change Serial2 to Serial, or you could copy the code so it sends to both.
- Tue Apr 16, 2024 4:40 pm
- Forum: Nissan
- Topic: Leaf Gen 1 Inverter Board
- Replies: 319
- Views: 158997
Re: Leaf Gen 1 Inverter Board
I have tested with your exact code with the } fixed and it all works. I am only sending messages to Can0 and don't have wifi so all readings are going to Serial ( I am using Arduino Due so just looking with serial monitor in IDE ). I thought it might be a timing problem as CheckCAN is polled in loop...
- Tue Apr 16, 2024 12:59 pm
- Forum: Mitsubishi
- Topic: Can you identify this Outlander item?
- Replies: 6
- Views: 553
Re: Can you identify this Outlander item?
From searches for part number this is dc to 110V AC. The dc-dc 12V converter part number TW-90 / 37129-01001, ( for heated windows ) has fans but they blow air over an external heatsink. The dc - 230V converter is also made by Toyota Industries is part number 9461A092.
- Tue Apr 16, 2024 11:32 am
- Forum: Nissan
- Topic: Leaf Gen 1 Inverter Board
- Replies: 319
- Views: 158997
Re: Leaf Gen 1 Inverter Board
There's a small error in CheckCan } if(inFrame.id >= 0x521 && inFrame.id <= 0x528 && inFrame.length == 8){ Sensor.ISA::gotFrame(&inFrame, 0); //Added by royhen99 } //////////////////////////////////////////////////////////////////////////////////////////////// } should be if(inFr...
- Mon Apr 15, 2024 11:21 pm
- Forum: Projects
- Topic: [WIP] Project Rising Sun: Suzuki SJ410k meets Leaf full stack
- Replies: 15
- Views: 4760
Re: [WIP] Project Rising Sun: Suzuki SJ410k meets Leaf full stack
0x59E, 0x55B and 0x5BC. If you look at each id one at a time it's clear that most of the messages sent are the fixed values from leafinv.cpp.
- Mon Apr 15, 2024 6:29 pm
- Forum: Nissan
- Topic: Leaf Gen 1 Inverter Board
- Replies: 319
- Views: 158997
Re: Leaf Gen 1 Inverter Board
I think I have fixed it. The isa library has is own interrupt service routine which takes priority over the routine in the main code. The modifications below fix this by calling the isa interrupt routine from the main code. I have checked with appropriate ids and data generated in Savvycan. 1) in IS...
- Mon Apr 15, 2024 10:37 am
- Forum: Projects
- Topic: [WIP] Project Rising Sun: Suzuki SJ410k meets Leaf full stack
- Replies: 15
- Views: 4760
Re: [WIP] Project Rising Sun: Suzuki SJ410k meets Leaf full stack
I have no experience with leaf PDM etc, but your code on github does not look up to date as it does not compile and has other errors. From you CAN log the zombieverter is still sending data on 3 ids which may be causing the problems. I think this is because where you have declared/defined the variab...
- Sun Apr 14, 2024 8:55 pm
- Forum: Nissan
- Topic: Leaf Gen 1 Inverter Board
- Replies: 319
- Views: 158997
Re: Leaf Gen 1 Inverter Board
Seting up the ISA shunt sets a filter on can0 that blocks the inverter can ids.
Adding the line in bold after Sensor.begin may fix it.
Sensor.begin(port,datarate);
port->setRXFilter(0, 0x100 0x300, false); // this allows ids 0x100 - 0x1FF and 0x500 - 0x5FF to pass
Adding the line in bold after Sensor.begin may fix it.
Sensor.begin(port,datarate);
port->setRXFilter(0, 0x100 0x300, false); // this allows ids 0x100 - 0x1FF and 0x500 - 0x5FF to pass
- Fri Apr 12, 2024 12:28 pm
- Forum: Battery Managment (BMS)
- Topic: BMW 330e pack balancing
- Replies: 12
- Views: 596
Re: BMW 330e pack balancing
Cell voltage readings are only valid when not balancing so they are updated every minute. The min to max cell voltage difference is checked against the "Balance Voltage Hysteresis" setting and balancing cycle continues until this is met.
- Fri Apr 12, 2024 11:54 am
- Forum: Battery Managment (BMS)
- Topic: BMW 330e pack balancing
- Replies: 12
- Views: 596
Re: BMW 330e pack balancing
Cells in series per string should be 96.
- Fri Apr 12, 2024 10:08 am
- Forum: Battery Managment (BMS)
- Topic: BMW 330e pack balancing
- Replies: 12
- Views: 596
Re: BMW 330e pack balancing
balstat indicates which individual cells are being balanced. 1 balancing, 0 not balancing. It's one digit per cell so 0xFFFF is all 16 cells in a module balancing.
- Fri Apr 12, 2024 9:01 am
- Forum: Battery Managment (BMS)
- Topic: BMW 330e pack balancing
- Replies: 12
- Views: 596
Re: BMW 330e pack balancing
Simpbms code balances BMW phev packs. The rate is very slow, maybe only 2mV per hour so a 150mV imbalance could take 2 - 3 days to balance.
- Mon Apr 08, 2024 12:08 pm
- Forum: Projects
- Topic: [WIP] BMW Z3
- Replies: 339
- Views: 190882
Re: [WIP] BMW Z3
I think the numbers across the bottom are sample number. The time varies with "Burst length" but from tests I have done it is about 27-28ms per sample with "Burst length" = 10.
- Mon Apr 01, 2024 12:55 pm
- Forum: General
- Topic: Help with this ElectroHydraulic Power steering pump?
- Replies: 5
- Views: 269
Re: Help with this ElectroHydraulic Power steering pump?
It also looks similar to the Ford Galaxy pump BG91-3K514-AC.
I found some info for a Ford pump here. https://www.diyelectriccar.com/threads/ ... ump.88303/
I found some info for a Ford pump here. https://www.diyelectriccar.com/threads/ ... ump.88303/
- Thu Mar 28, 2024 11:09 pm
- Forum: Toyota/Lexus
- Topic: Gen 3 Prius Transaxle P410 Makes Clunky Noise.
- Replies: 26
- Views: 1188
Re: Gen 3 Prius Transaxle P410 Makes Clunky Noise.
Did today's testing unequivocally show that the inverter temperature is signed 8 bit?
If so then the GS450 tmphs/temp_inv_water still needs fixing
temp_inv_water=int8_t(mth_data[42]);
If so then the GS450 tmphs/temp_inv_water still needs fixing
temp_inv_water=int8_t(mth_data[42]);
- Thu Mar 21, 2024 2:19 pm
- Forum: General
- Topic: Battery packs with 3p
- Replies: 15
- Views: 1118
Re: Battery packs with 3p
the part you have missed is it also comes with a 50% increase in size and weight. Tom's data above shows it's possible to get the same or better performance with 2P configuration.
- Fri Mar 15, 2024 4:42 pm
- Forum: Mitsubishi
- Topic: I just bought a Mitsubishi Outlander charger. - Now What?
- Replies: 30
- Views: 1811
Re: I just bought a Mitsubishi Outlander charger. - Now What?
That's the rear inverter to motor cable.
That price is very cheap for both cables. Was this listing for just one of the cables and did you get the right one?
That price is very cheap for both cables. Was this listing for just one of the cables and did you get the right one?
- Sun Mar 10, 2024 11:18 pm
- Forum: Getting Started
- Topic: Setting Up CAN reader - STM32 Nucleo board
- Replies: 9
- Views: 668
Re: Setting Up CAN reader - STM32 Nucleo board
You can not just change board type and expect it to compile . The STM32 core library does not support can so an external library is needed, ( or write your own ). Even then a lot of changes are needed to get it to work.
Non of the libraries I am familar with support STM32F334.
Non of the libraries I am familar with support STM32F334.
- Thu Mar 07, 2024 1:55 pm
- Forum: Mitsubishi
- Topic: What do you need an Outlander HV Junction box for?
- Replies: 2
- Views: 369
Re: What do you need an Outlander HV Junction box for?
It's for connecting the heater and a DC-DC converter for heated screens or DC-AC converter.
- Tue Mar 05, 2024 10:12 pm
- Forum: Projects
- Topic: ISA Shunt With ZombieVerter VCU [FINISHED]
- Replies: 14
- Views: 1217
Re: ISA Shunt With ZombieVerter VCU [FINISHED]
The SPI connections are on the connector marked "SPI", just look up Arduino Due pinout for actual pins.
If you intend to run Savvycan then you only need one or two CAN transceivers, either a MCP2551 or SN65HVD230.
CANRX - CAN0 RX, CANTX - CAN0 TX.
DAC2 - CAN1 RX, Pin 53 - CAN1 TX.
If you intend to run Savvycan then you only need one or two CAN transceivers, either a MCP2551 or SN65HVD230.
CANRX - CAN0 RX, CANTX - CAN0 TX.
DAC2 - CAN1 RX, Pin 53 - CAN1 TX.
- Tue Mar 05, 2024 8:09 pm
- Forum: Inverters / Motor Controllers
- Topic: with or without (C18,C19) [SOLVED]
- Replies: 1
- Views: 356
Re: with or without (C18,C19) [SOLVED]
They are load capacitor for X2 which is a crystal for the real time clock. As this uses an internally generated clock the crystal is not fitted and the capacitors are not needed.
- Tue Mar 05, 2024 3:25 pm
- Forum: Projects
- Topic: [wip] DIY electric buggy for school students, Renault PHEV drive, Auris openinverter board
- Replies: 12
- Views: 1081
Re: [wip] DIY electric buggy for school students, Renault PHEV drive, Auris openinverter board
I think this is the correct part Sumitomo 8100-3455. I buy parts from here https://www.auto-click.co.uk/6189-1240
Not so good from outside the UK but is a least a good source of infomation.
Not so good from outside the UK but is a least a good source of infomation.
- Tue Mar 05, 2024 12:20 am
- Forum: Vehicle Control (VCU)
- Topic: zombiverter high speed can3 jumpers
- Replies: 2
- Views: 276
- Mon Mar 04, 2024 11:03 am
- Forum: General
- Topic: Webasto HVH50
- Replies: 81
- Views: 13462
Re: Webasto HVH50
If I use the max 8 bit value of 255, by the formula of (255-256)*40 = -40, right??? No, the simplist way it to put the code back to how it was originally with the power sent over LIN the required power / 40. The 400 - 256 is just truncating a 9 bit number to 8 bits, it's not a general formula for c...