"You can also buy two controllers and then use the MG1 inverter to generate single-phase output. Either directly from the power generated by MG2 or through the battery amplifier converter. Three-phase software may also be available, but is not yet supported. " Does your controller control ...

This statement applies to all HV batteries of the PRIUS series or only to the Prius 3:
Battery backup power is up to 4.4 kW * h.

The system can operate in the following ways: 1..MG1, is driven by the gearbox sprockets, generates current to charge the HV battery and also produces current at the output of the single-phase or three-phase MG2 inverter at what power ..? 2..MG2, is driven by the gearbox gears, generates current, ch...

"You can also buy two controllers and then use MG1 inverter to generate 1-phase output. Either directly from the power generated by MG2 or via the boost converter from your battery. 3-phase would also be possible but is not supported by software yet. " What power does it generate: the inve...

Do I understand that the hybrid system in this case "boost converter" produces 220/240 v at a current of max 300 A?

I was thinking that only MG2 reaches 50KW ... Does MG1 also generate 10kw?
My requirement would be max 10/12 KW

"So the MG1 makes direct current to the battery, and the MG2 part makes the single-phase AC output out of it. Then this fabric is twisted using a transformer in three fabrics moved at 120 degrees that could power your home. It probably wouldn't sync with the network because of the entire transf...

In your video, do you use the function of: buck converter to get 240 VAC? Is the battery voltage 12 x 7.5 v per element? What power or current does the Prius 2's Hv battery provide? 10kw..20kw or much less! "You need 2x Toyota Prius ™ Gen2 inverter controller because you want to use two cars. I...

I wonder if anyone tried to make a controller like: https://openinverter.org/shop/index.php ... duct_id=63,
for Toyota Prius 1?

Your assumptions about the inverter are correct. So you want to attach a gen2 gearbox to the inverter. The gearbox is basically always in regen mode and is turned by some power source like a wind turbine. That generates some voltage on the DC bus, say 300V, that you then want to feed into a battery...

Hello, I propose to the attention of all those interested and approved, the production of electricity using MG1 + MG2 from Toyota Prius 1 or 2. The idea came to me trying to produce electricity using a PMG motor / generator driven by wind, water or ultimately a heat engine. I was wondering if I coul...

Hello , I watched with interest the posts on this topic. I work in an appliance service (TV repair department), I have some knowledge of electronics and mechanics and enough electronic angels to support me, if needed. I would like to create a personal project with the gearbox that includes MG1 and ...

Hello , I watched with interest the posts on this topic. I work in an appliance service (TV repair department), I have some knowledge of electronics and mechanics and enough electronic angels to support me, if needed. I would like to create a personal project with the gearbox that includes MG1 and ...

Hello , I watched with interest the posts on this topic. I work in an appliance service (TV repair department), I have some knowledge of electronics and mechanics and enough electronic angels to support me, if needed. I would like to create a personal project with the gearbox that includes MG1 and M...