ZombieVerter VCU Wont RUN
Search found 2293 matches
- Sat May 04, 2024 4:13 am
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
- Sat May 04, 2024 12:29 am
- Forum: Projects
- Topic: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
- Replies: 1280
- Views: 537783
Re: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
first up was the 3rd Gen Prius 2011 pedal
those of you following the VW Rabbit conversion may recall we had to trim this Prius pedal to keep it from bottoming out
those of you following the VW Rabbit conversion may recall we had to trim this Prius pedal to keep it from bottoming out
- Fri May 03, 2024 4:48 pm
- Forum: Projects
- Topic: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
- Replies: 1280
- Views: 537783
- Thu May 02, 2024 10:52 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
I presume you know this, but the reason the pins on a switch are counterintuitive, is because the switch has a pivot in the middle. Like a teeter totter, when one side of the lever goes up, the other side goes down. So the back end of the lever that actually does the switching, points to the opposi...
- Thu May 02, 2024 1:21 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
84 VW MK1 Rabbit DIY Wire Harness Forward & Reverse Switch https://youtu.be/GGYUhMiJOkw these are the two pins needed for the Forward and Reverse Switch, but there are many ways to skin this cat IMG_4287 Labeled.jpg the switch is hugging the fuse block just for the photo opp, that's not where i...
- Thu May 02, 2024 1:19 pm
- Forum: Projects
- Topic: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
- Replies: 1280
- Views: 537783
- Wed May 01, 2024 1:46 pm
- Forum: Projects
- Topic: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
- Replies: 1280
- Views: 537783
Re: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
decisions, decisions...
Center Stage: The G.O.A.T. aka Pedalus Maximalus BMW E46 Part# 3542 6762481-03 the pedal that started it all !
(please show sum respect)
Center Stage: The G.O.A.T. aka Pedalus Maximalus BMW E46 Part# 3542 6762481-03 the pedal that started it all !
(please show sum respect)
- Wed May 01, 2024 1:45 pm
- Forum: Projects
- Topic: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
- Replies: 1280
- Views: 537783
- Wed May 01, 2024 1:16 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
OMG, as my old boss would say, at least he's consistent !MattsAwesomeStuff wrote: ↑Wed May 01, 2024 9:15 am "You might see stuff like that, where your pin was underneath the pin and looked like it was on but wasn't"
...
- Wed May 01, 2024 4:21 am
- Forum: Projects
- Topic: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
- Replies: 1280
- Views: 537783
Re: 1971 GMCe Lexus GS450H BMW 530e Tesla Model S Electruck [FINISHED]
out with the old...
- Tue Apr 30, 2024 5:48 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
How to do a ZombieVerter VCU Ver 2.15 A Firmware Upgrade
- Tue Apr 30, 2024 4:51 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
we find the dirmode [direction mode] under the Parameters aka "Settings" section in the Open Inverter web interface for the ZombieVerter VCU accessible via WiFi DefaultForward is our fifth choice. This setting tells the VCU that as soon as we turn the key to the Run position we are ready t...
- Tue Apr 30, 2024 4:45 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
we find the dirmode [direction mode] under the Parameters aka "Settings" section in the Open Inverter web interface for the ZombieVerter VCU accessible via WiFi SwitchReversed is our fourth choice. You would use this if say you took a rear motor from an OEM vehicle and flipped it to instal...
- Tue Apr 30, 2024 3:42 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
we find the dirmode [direction mode] under the Parameters aka "Settings" section in the Open Inverter web interface for the ZombieVerter VCU accessible via WiFi ButtonReversed is our third choice. You would use this if say you took a rear motor from an OEM vehicle and flipped it to install...
- Mon Apr 29, 2024 8:29 pm
- Forum: Getting Started
- Topic: ZombieVerter VCU Connector Depinning Tool
- Replies: 1
- Views: 187
Re: ZombieVerter VCU Connector Depinning Tool
used for depinning this type of harness from AliExpress
the orange thing appears to be just a shield to either prevent the tool from getting damaged or you from getting cut, maybe
the orange thing appears to be just a shield to either prevent the tool from getting damaged or you from getting cut, maybe
- Mon Apr 29, 2024 8:27 pm
- Forum: Getting Started
- Topic: ZombieVerter VCU Connector Depinning Tool
- Replies: 1
- Views: 187
ZombieVerter VCU Connector Depinning Tool
not sure where this belongs so dropping it here, hope it helps somebody out
REMOVAL TOOL FOR FEMALE TERMINALS
Manufacturer: Aptiv (formerly Delphi)
TTI Part Number: 210S048
Mfr Part Number: 210S048
Price: $65
REMOVAL TOOL FOR FEMALE TERMINALS
Manufacturer: Aptiv (formerly Delphi)
TTI Part Number: 210S048
Mfr Part Number: 210S048
Price: $65
- Mon Apr 29, 2024 2:54 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
we find the dirmode [direction mode] under the Parameters aka "Settings" section in the Open Inverter web interface for the ZombieVerter VCU accessible via WiFi
Switch is our second choice.
Switch is our second choice.
- Mon Apr 29, 2024 2:40 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
just want to share some screen shots with those who are still waiting on their Zombies to arrive ;) we find the dirmode [direction mode] under the Parameters aka "Settings" section in the Open Inverter web interface for the ZombieVerter VCU accessible via WiFi Button is our first choice. T...
- Mon Apr 29, 2024 5:21 am
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
ZombieVerter VCU Forward & Reverse
These two pins are used to set Direction
These two pins are used to set Direction
- Pin 53 - Reverse
- Pin 54 - Forward
- Sat Apr 27, 2024 5:37 pm
- Forum: News
- Topic: Electric cars catch fire in Florida after flooding
- Replies: 21
- Views: 11145
Re: Electric cars catch fire in Florida after flooding
Cars have been catching fire for over a hundred years now. The difference is that firefighting techniques and technology like aqueous film forming foam have been invented to deal with auto fires. EV lithium battery fires offer a new challenge to firefighters. They basically have no strategy to deal...
- Sat Apr 27, 2024 3:44 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
- Sat Apr 27, 2024 2:44 pm
- Forum: News
- Topic: Electric cars catch fire in Florida after flooding
- Replies: 21
- Views: 11145
Re: Electric cars catch fire in Florida after flooding
I'm sorry I couldn't help myself
- Sat Apr 27, 2024 2:20 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
84 VW MK1 Rabbit DIY Wire Harness 4 - Start Power Fuse Block
The guy who invented the ZombieVerter tells us about Pin #52
The guy who invented the ZombieVerter tells us about Pin #52
- Sat Apr 27, 2024 1:48 pm
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
unGermaning the Voltswagen
- Sat Apr 27, 2024 12:26 am
- Forum: Projects
- Topic: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
- Replies: 398
- Views: 29838
Re: 1984 Voltswagen Rabbit Prius Gen 3 ZOMBIE
84 VW MK1 Rabbit DIY Wire Harness 3 - Ignition Power Fuse Block the one where the Greg adds a second four fuse block, this one gets it's power when you turn the key in the ignition to On https://youtu.be/Hx1gHf8amtA IMG_4234.JPG The man responsible for the ZombieVerter tells us about Pin #15 Igniti...