i have checked all connections !
Do any of you have GEN1 working on the Zonmbie?
Just for your information:
I also had problems at the beginning that the PC can connect to the Zombie !
After that I used a USB - Wifi and now the connection works!
Digitus DN-7042-1 WLAN Stick USB 2.0 150 MBit/s
Search found 18 matches
- Wed Dec 15, 2021 6:09 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
- Sun Dec 12, 2021 9:57 am
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
thanks for the tip
I have already seen the video
do you have a solution?
I have already seen the video
do you have a solution?
- Sat Dec 11, 2021 2:58 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
https://www.youtube.com/watch?v=vHrb0n2qNzM these are my parameters I cannot find an error do you have the solution danke peter parameter value Vehicle Module Inverter Leaf_Gen1 Vehicle None Throttle potmin 156 dig potmax 840 dig pot2min 305 dig pot2max 2042 dig regentravel 30 % regenmax -30 % potmo...
- Tue Nov 30, 2021 9:12 am
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
Hello,
I am very glad that the motor turns !!!
forwards everything is OK
only in reverse the engine turns to a constant speed and stays there until I switch to forward again
what could be the problem ?
- Tue Nov 30, 2021 9:04 am
- Forum: Vehicle Control (VCU)
- Topic: The ZombieVerter VCU Project
- Replies: 930
- Views: 188280
Re: The ZombieVerter VCU Project
Hello,
I am very glad that the motor turns !!!
forwards everything is OK
only in reverse the engine turns to a constant speed and stays there until I switch to forward again
what could be the problem ?
- Wed Nov 03, 2021 1:50 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
thanks for the video !
It has shown me many interesting things !
It has shown me many interesting things !
- Tue Nov 02, 2021 7:33 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
Hi Dämon
I have the same problem and can't get CAN signals to CAN2.
Hi Paul
I can take photos tomorrow of how I soldered the loose components onto the board.
then we can try to compare
I have the same problem and can't get CAN signals to CAN2.
Hi Paul
I can take photos tomorrow of how I soldered the loose components onto the board.
then we can try to compare
- Sun Oct 31, 2021 10:00 am
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
thank you for the support !!
only short question
should on CAN2 from the VCU signals come only with 12V applied ?
So that I can control my CAN connection and be sure that the VCU is working properly!
Now there are no CAN signals!
only short question
should on CAN2 from the VCU signals come only with 12V applied ?
So that I can control my CAN connection and be sure that the VCU is working properly!
Now there are no CAN signals!
- Sat Oct 30, 2021 5:17 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
Thank you unfortunately I don't have an Arduino Due only Nano Have I understood this correctly? This is a code that I run via an Arduino which then sets the correct parameters in the Shant ? I will try it One more question If I apply voltage to the Zombie board, should CAN signals arrive at CAN2? I ...
- Sat Oct 30, 2021 1:12 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
Thanks for the answer ! Where can I find the code ? ( code in the zombieverter project (ISA::initialize) ) unfortunately I have a problem with the shunt ! It is strangely set to 1000kbps ( should be 500 ) I then tried to set it to 500kbps according to the instructions. now I cannot receive any data ...
- Fri Oct 29, 2021 4:46 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
Hello I need your help again I have ordered the shunt and connected it unfortunately I don't get any correct data displayed in the web interface for example udc 16777.18 udc2 -33554.4 udc3 -64225.25 idc -50311.62 If I connect an Arduino CAN shield with this code https://openinverter.org/wiki/Getting...
- Sun Oct 24, 2021 4:50 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
Thank you this has helped me a lot !!!
Please link it on the wiki page !!!
Thanks
Peter
Please link it on the wiki page !!!
Thanks
Peter
- Sun Oct 24, 2021 2:15 pm
- Forum: Vehicle Control (VCU)
- Topic: ZombieVerter VCU Support
- Replies: 915
- Views: 465502
Re: ZombieVerter VCU Support
hello, I hope you can help me! The first question : what does the red flashing LED on the zombieverter board mean ? I have a red one on the ESP and a red one on the board that are permanently lit and one on the board that is flashing. 2. i don't get any CAN data from the board What settings do I nee...
- Tue Oct 19, 2021 7:50 pm
- Forum: Vehicle Control (VCU)
- Topic: The ZombieVerter VCU Project
- Replies: 930
- Views: 188280
Re: The ZombieVerter VCU Project
thank you for your message
- Tue Oct 19, 2021 5:42 pm
- Forum: Vehicle Control (VCU)
- Topic: The ZombieVerter VCU Project
- Replies: 930
- Views: 188280
Re: The ZombieVerter VCU Project
hello
I have a simple question
how do the components that come loose in the kit are positioned?
they are not the same parts as in the video
there is no marking on the parts
does anyone have photos of the board
or a link where it is described
thanks
peter
I have a simple question
how do the components that come loose in the kit are positioned?
they are not the same parts as in the video
there is no marking on the parts
does anyone have photos of the board
or a link where it is described
thanks
peter
- Wed Oct 06, 2021 5:25 pm
- Forum: Vehicle Control (VCU)
- Topic: The ZombieVerter VCU Project
- Replies: 930
- Views: 188280
Re: The ZombieVerter VCU Project
Thank you for your professional answer ! If I connect the BMS and the charger with CAN, the system will work without the VCU? as in this diagram : https://activeautomation.co.nz/images/thumbs/0000631_blogimages.jpeg I have another question: I wanted to try powering the charger with 12V to read the C...
- Wed Oct 06, 2021 12:27 pm
- Forum: Vehicle Control (VCU)
- Topic: The ZombieVerter VCU Project
- Replies: 930
- Views: 188280
Re: The ZombieVerter VCU Project
Hi
I think this is better if it is here
it is about the zombieverter
please for a technical information
Thanks
Peter
I think this is better if it is here
it is about the zombieverter
please for a technical information
Thanks
Peter
- Wed Oct 06, 2021 8:23 am
- Forum: Vehicle Control (VCU)
- Topic: The ZombieVerter VCU Project
- Replies: 930
- Views: 188280
Re: The ZombieVerter VCU Project
Hello conversion friends, I am Peter from Germany and a beginner in converting vehicles ! I will install a Leaf Gen1 in a Mercedes W123. Both cars I already have and the Leaf components I have already removed I have already ordered the ZombieVerter I have a request to the specialists Which of the Le...