I think that's an ac/dc inverter.

Gregski wrote: ↑Sun Feb 04, 2024 4:27 pm dropped the DC-DC Converter [ Beta version ]


IMG_1469.JPG


IMG_1471.JPG

You can give the contactors a couple whacks with a hammer or screwdriver handle and they should pop free... should.

so the VSA is going to be monitoring things like wheel speed, yaw, steering angle, and acceleration. It will then tell the ABS modulator which wheels to apply braking force to. this is per wheel braking force intended to counter act the unintended rotation of the vehicle around the y axis. a spinout...

Hello everyone, I have a Tesla Wall Connector gen2 for sale. The wall connector its self is brand new and comes in the box with all the goodies. I have taken off the 8ft Tesla cord and added a 14ft Jplug80 so it's good for 19.2Kw. Its NA spec, split phase 240v 100a circuit 80a charge current. I've t...

What kind of 3d printer are you using to print those housings?

It sounds like you need to send frame ID 0x3b then fill the data frame with 0xb3, 0x05, 0x00, 0x90, 0xff, 0x00, 0x00, 0x00 LIN is funky if youre used to CAN. its a master/slave setup. The more PC way to phrase that and according to recent standards is Commander/Responder. Anyhow. The Master has a sc...

IDK if any of this is new info or helpful Ill admit I am just coming into this, However I believe I2SE makes the PLC interface chip for the LIM. I have found some decent info on their website including a link to the QCA 7000 drivers on Github. perhaps they would help to understand just what the PLC ...