Search found 6 matches
- Mon Oct 11, 2021 3:30 pm
- Forum: Toyota/Lexus
- Topic: Toyota Auris and Yaris Inverter Logic board
- Replies: 140
- Views: 41928
Re: Toyota Auris and Yaris Inverter Logic board
Hi, I have the yaris inverter logic board block IV and am fumbling my way through this.... for anyone else new to this. The v2 block IV yaris inverter logic board resistors do not need changing as in the wiki and the MG2 Current Sensor connector (labelled 7 on the board) does not need to be switched...
- Sat Oct 09, 2021 9:49 am
- Forum: Projects
- Topic: 2CV conversion to fuel cells
- Replies: 7
- Views: 1820
Re: 2CV conversion to fuel cells
We received our Auris/Yaris inverter board from Damien, and Alexandre Lemaire tested it and documented his test procedure (attached file)
- Sat Oct 09, 2021 9:40 am
- Forum: Projects
- Topic: 2CV conversion to fuel cells
- Replies: 7
- Views: 1820
Re: 2CV conversion to fuel cells
The attached document is a description of what we plan to do
- Sat Oct 09, 2021 9:34 am
- Forum: Projects
- Topic: 2CV conversion to fuel cells
- Replies: 7
- Views: 1820
Re: 2CV conversion to fuel cells
Apologies for the lack of info. The pandemic and other work has meant that I've not been able to do much on this. We did get two interns in France to move this forward and I will try and upload what they have done, and I will be trying to get the motor spinning over the next day or two. To answer th...
- Fri May 21, 2021 8:11 am
- Forum: Projects
- Topic: 2CV conversion to fuel cells
- Replies: 7
- Views: 1820
2CV conversion to fuel cells
As the UK Government will not fund any fuel cell vehicle applications other than by OEMs, we decided to build a fuel cell powered 2cv to drive to Cop26. The fuel cell stack will be 3.5kW built by us from our own designed and fabricated alkaline fuel cells. They will charge a battery pack giving a ra...
- Mon May 17, 2021 11:59 am
- Forum: Projects
- Topic: C-Zero 2CV van
- Replies: 10
- Views: 3357
Re: C-Zero 2CV van
Hi, we are working on a 2CV conversion to alkaline fuel cells but are at the beginning of the project. we purchased a Meiden s61 motor from ebay (which I believe came out of a Mitsubishi) and are looking at how to control it. Have you installed a controller for this yet?