FYI, I will be traveling from Northern Virginia to Dallas, TX the weekend of April 6/7, and could deliver or meet you along the way if that helps.

FYI, I will be traveling from Northern Virginia to Dallas, TX the weekend of April 6/7, and could deliver or meet you along the way if that helps.

Yeah I couldn't get it to work. I don't have the exact same setup as before, and have not had time to try methodically verify, although so far the only thing that gets me any CAN messages at all, is using a canable v2 which supports CAN-FD, and a recent version of SavvyCAN which has mods to support ...

You know what, let me try again. Originally I had problems and could get no messages at all until I switched to CAN-FD, but in retrospect I did have some bad hardware. Maybe that was it. Will try test later today. Thinking about it, i wasn't the only one not able to communicate with it until using C...

Looking at their website, https://www.solaxpower.com/x1-hybrid-g4/ , the Solax X1-HYBRID-G4 only supports a battery in the 80-480V range.

If you are talking about the 800V e-GMP battery like in a hyundai ioniq 5 or Kia ev6, yes, but only if you live somewhere you get 3 phase service. I was initially interested in this, but ran into a couple of hurdles. First, you need hardware that supports CAN-FD to talk to the battery natively, whic...

To be clear I have multiple packs, a total of 52 modules available at the moment (one full pack and 22 left from another)

How much for shipping to 80465 for the whole pack? Sorry I am not getting notifications on this thread for some reason, and I have already mostly dismantled the last battery now. If you don't care about the battery chassis I can research shipping options if I pallet up the modules (would be somethi...

Geesh, still not getting notifications on this thread. Thanks for PMing me. As I said I want to hang onto these so whomever gets the motors has the cables, But I want these to get used and it's a bit of a chicken before the egg situation - if no-one is able to figure out how to use them, then these ...

FYI my January trip is cancelled, but I will be going in April for sure.

Last chance to buy a fully assembled pack. I will be pulling the modules and selling them individually for $200 each. Canbus data shows the cells to be extremely well balanced and less than a a single full charge/discharge cycle of use. Any of the major BMS should work with these. They have connecto...

Thanks @jrbe. Sorry for not responding @P.S.Mangelsdorf, I am not sure why but I am not getting notifications on regular responses (but am when tagged it seems). I am thin on details, but happy to provide any info I can. These cars were part of an autonomous driving program (robotaxis) that ended, a...

Just noticed this. Sorry @projectgus for the continued derailment of this thread. I could start a new one for the Ioniq 5 battery and continue there if you'd like, but can't move the existing messages over myself. @johu/other mods - is it possible to move the Ioniq 5 posts out into another thread, p...

Yes I believe you are correct. In fact when I got my new CANDue I did notice a difference in serial log output using the CAN-FD connectors and Collin even explained it could be due to CAN-FD messages but I guess I didn't understand :). What I now believe was happening was it was seeing CAN-FD messag...

Come on folks, 800V is the FUTURE :) What's it going to take to get interest in these? $1,500? If I can sell a couple of these, I could afford to send one to Damien if he has any interest in reverse engineering one. More pictures while moving them to storage if it helps. IMG_0711.jpeg IMG_0713.jpeg ...

Unfortunately I have not. I have a Candue board which is supposed to support CAN-FD and that canbus port works on regular canbus testing with a leaf battery, but I am nt sure if I am using it correctly for CAN-FD use. I will research. Life has gotten in the way, but my plan was to plug in as much of...

$2,000 OBO

I got a new can board and verified it's working on a known setup - a gen1 nissan leaf pack I have. But still no luck getting any messages from the ioniq 5 bms. I have traced all the wires on connector C of my BMU other than the "SDU_ Wake Up", looped all the interlocks, and tried both CAN ...

Sorry, I don't seem to be getting notifications, so did not see this. The module dimensions are without mounting tabs - 15.25"x5.25"x4.25" with mounting tabs - 16 7/8"x6.25"x4.25" The tabs overlap to allow bolting 2 together with a single bolt, so the effective width is...

Thanks. I believe i have a problem with my canbus board, and am trying to verify/fix that before trying again. I am hoping thats the problem and not me

I will look into a loopback test, and try send a message. I am not sure if my can testing setup is working correctly. I will test something I have used it on before successfully to make sure. I should have mentioned that I did do a resistance check on the to CAN busses. G-CAN H/L is 123ohm with noth...

cgalpin, does it draw any current from 12V? What CAN interface do you use? Ioniq 5 uses CAN-FD so frames could be sent but treated as errors and not shown Does 0.14A sound like enough of a draw to power the BMU? I am going to double check everything tonight, and see if i can trace more wires, but l...

****** UPDATE - modules only. Pictures further in the thread ******* This is from a rear wheel drive Hyundai Ionic 5 with 124 miles on it - like new. It is composed of 30 modules, which are designed to be thermally managed by sitting on a coolant/heating plate (the entire bottom of the battery). Eac...

Ugh, I am not getting notifications even thought I am subscribed to this thread. @projectgus this is a 800v architecture, yes although I believe the nominal voltage is considerably lower. The battery I just opened has 30 modules, which i believe means its a 72.6kWh, and is currently at 647.0V. @maci...

Hello Royboy, any luck by checking my EB11 wiring sheet? https://docs.google.com/spreadsheets/d/129eVtTZAlxZUx7fW1ouRVVqTLK5qwCE_Arj1ezDnoXA/edit?usp=sharing I am unable to get any life out of mine either. At least looking at the Ioniq 5 "BMU extension connector" external wires, my pin 13...