Introduction CAN STD

From openinverter.org wiki

Revision as of 20:00, 17 February 2020 by Joromy (talk | contribs) (Created page with "This is an attempt to get all openinverter hardware to follow a standard on their CAN bus communication. Since there is priority in the CAN bus data, it's important to have a...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This is an attempt to get all openinverter hardware to follow a standard on their CAN bus communication. Since there is priority in the CAN bus data, it's important to have a standard.

Products:

Openinverter
Simp BMS
Tesla Charger (only with CAN)
Isolation monitor
CAN display
HV voltage sensor/current sensor
Misc button, gear shift, menu selector, joystick
Brake and accelerator

Retrieved from "https://openinverter.org/wiki/index.php?title=Introduction_CAN_STD&oldid=344"