Tesla Model S/X GEN3 Charger

From openinverter.org wiki
Revision as of 18:34, 1 April 2021 by Janosch (talk | contribs) (added dimensions)
Jump to navigation Jump to search

The Tesla GEN3 is a single/three phase AC charger that was fitted in the Model S starting with the 2016 'facelift' model. The GEN3 has been fitted on all Model X models.

It is 566mm long, 360mm wide and 90mm high, without the water ports on both small sides. On the underside there are 8 M6 threads to attach.

"Running a Tesla charger at much under 200v dc will cause it to explode. Yes I know the label says 50 to 450v but it lies. Yes I blew one up discovering this."

gen 3 controller

https://github.com/damienmaguire/Tesla-Gen3-Charger