CAN table CAN STD

The Status cell will have several status like:

• Suggested,
• Approved, looks good go ahead and put in firmware
• STD, is established and standard in firmware

Sign with your forum name, please do not delete any rows, just add a new.

Openiverter CAN data out.

Function	CAN-Id	Byte0	Byte1	Byte2	Byte3	Byte4	Byte5	Byte6	Byte7	Description	Status	Sign
DIR	0x123	123	123	123	123	123	123	123	123		test	joromy
FWD	0x123	123									test	joromy
REW	0x123		123									joromy
P/N	0x123			123								joromy

Simp BMS CAN data out.

Function	CAN-Id	Byte0	Byte1	Byte2	Byte3	Byte4	Byte5	Byte6	Byte7	Description	Satus	Sign
Pack Volt	123	123	123								test	joromy

Tesla charger CAN data out (only DUE based board)

Function	CAN-Id	Byte0	Byte1	Byte2	Byte3	Byte4	Byte5	Byte6	Byte7	Description	Status	Sign
Unconnected	0x3D8						0				Suggested	joromy
Buttonpress	0x3D8						1				Suggested	joromy
Connected	0x3D8						2				Suggested	joromy
EVSE disable	0x3D8							0		Normal mode	Suggested	joromy
EVSE enable	0x3D8							1		AC enable, no charge	Suggested	joromy