Zombieverter Parameters and Spot Values - Revision history

Rstevens81: added note on timer

2025-04-22T15:20:08Z

added note on timer

← Older revision		Revision as of 15:20, 22 April 2025
Line 516:		Line 516:
	\|Chg_Hrs		\|Chg_Hrs
	\| \|\|Hours\|\|0\|\|23\|\|0		\| \|\|Hours\|\|0\|\|23\|\|0
	\| \|\|		\| \|\| rowspan="2" \|Set to disable to set (similar to above)
	\|-		\|-
	\| 82		\| 82
	\|Chg_Min		\|Chg_Min
	\| \|\|Mins\|\|0\|\|59\|\|0		\| \|\|Mins\|\|0\|\|59\|\|0
	~~\| \|~~\|		\|
	\|-		\|-
	\| 83\|\|Chg_Dur		\| 83\|\|Chg_Dur
	\| \|\|Mins\|\|0\|\|600\|\|0		\| \|\|Mins\|\|0\|\|600\|\|0
	\| \|\|		\| \|\|Needs to be >0 and Chgctrl set to timer to work
	\|-		\|-
	\|84		\|84

Rstevens81: added note on setting clock

2025-04-22T14:57:13Z

added note on setting clock

← Older revision		Revision as of 14:57, 22 April 2025
Line 495:		Line 495:
	\|Set_Day		\|Set_Day
	\| \|\| \|\|0\|\|6\|\|0		\| \|\| \|\|0\|\|6\|\|0
	\| \|\|		\| \|\| rowspan="4" \|1.Ensure Chgctrl is set to disable, save to flash
			2.Enter time under Set_Day, Set_Hour, Set_Min to appropriate values, Hit save

			3.Return Chgctrl to desired state, hit save
	\|-		\|-
	\| 78\|\|Set_Hour		\| 78\|\|Set_Hour
	\| \|\|Hours\|\|0\|\|23\|\|0		\| \|\|Hours\|\|0\|\|23\|\|0
	~~\| \|~~\|		\|
	\|-		\|-
	\|79\|\|Set_Min		\|79\|\|Set_Min
	\| \|\|Mins\|\|0\|\|59\|\|0		\| \|\|Mins\|\|0\|\|59\|\|0
	~~\| \|~~\|		\|
	\|-		\|-
	\|80		\|80
	\|Set_Sec		\|Set_Sec
	\| \|\|Secs\|\|0\|\|59\|\|0		\| \|\|Secs\|\|0\|\|59\|\|0
	~~\| \|~~\|		\|
	\|-		\|-
	\| 81		\| 81

Marvin: added waring based on this experience https://openinverter.org/forum/viewtopic.php?t=6256&start=25

2025-04-03T16:33:52Z

added waring based on this experience https://openinverter.org/forum/viewtopic.php?t=6256&start=25

← Older revision		Revision as of 16:33, 3 April 2025
Line 860:		Line 860:
	\|-		\|-
	\| din_brake\|\| \|\|		\| din_brake\|\| \|\|
	\| \|\|Brake input signal		\| \|\|Brake input signal - (if applied = no Potnom = no drive)
	\|-		\|-
	\|din_forward \|\| \|\|		\|din_forward \|\| \|\|

Bigpie: Making the current direction correct, negative is discharge.

2025-03-25T09:31:59Z

Making the current direction correct, negative is discharge.

← Older revision		Revision as of 09:31, 25 March 2025
Line 268:		Line 268:
	\|21\|\|idcmax		\|21\|\|idcmax
	\| \|\| "A"\|\|0\|\|5000\|\|5000		\| \|\| "A"\|\|0\|\|5000\|\|5000
	\| \|\|Maximum DC input current		\| \|\|Maximum DC input current '''(regen current)'''
	\|-		\|-
	\|22\|\|idcmin		\|22\|\|idcmin
	\| \|\| "A"\|\|-5000\|\|0\|\|-5000		\| \|\| "A"\|\|-5000\|\|0\|\|-5000
	\| \|\|Maximum DC output current (~~regen~~)		\| \|\|Maximum DC output current '''(drive/discharge current)'''
	\|-		\|-
	\|23\|\|tmphsmax		\|23\|\|tmphsmax
Line 771:		Line 771:
	\|-		\|-
	\| idc\|\|A\|\|		\| idc\|\|A\|\|
	\|Shunt/BMS\|\|HV Current - From Shunt or BMS		\|Shunt/BMS\|\|HV Current - From Shunt or BMS ''(A negative current is discharging out of the battery, positive is charging in to the battery)''
	\|-		\|-
	\|KWh\|\|kwh\|\|		\|KWh\|\|kwh\|\|

Tom91 at 10:38, 14 March 2025

2025-03-14T10:38:20Z

← Older revision		Revision as of 10:38, 14 March 2025
Line 305:		Line 305:
	\|131\|\|throtrpmfilt		\|131\|\|throtrpmfilt
	\| \|\| "rpm/10ms"\|\|0.1 \|\|200\|\|15		\| \|\| "rpm/10ms"\|\|0.1 \|\|200\|\|15
	\| \|\|~~''-TBC''~~		\| \|\|Change of speed fed into the dynamic speed based throttle map. High value is slower response to rapid speed change. If you have low speed judder increase this value.
	\|-		\|-
	\| colspan="9" \|'''- Gearbox Control'''		\| colspan="9" \|'''- Gearbox Control'''

Tom91: Digipot

2025-01-31T18:22:02Z

Digipot

← Older revision		Revision as of 18:22, 31 January 2025
Line 662:		Line 662:
	\|0		\|0
	\|		\|
	\|		\|Set resistance level of POT 1 pin to ground, steps from 0-255 0-10kOhm
	\|-		\|-
	\|118		\|118
Line 672:		Line 672:
	\|0		\|0
	\|		\|
	\|		\|Set resistance level of POT 2 pin to ground, steps from 0-255 0-10kOhm
	\|-		\|-
	\|134\|\| FanTemp		\|134\|\| FanTemp

Tom91: Spot Values update

2025-01-03T12:37:26Z

Spot Values update

Show changes

Tom91: Spot Values start

2024-12-30T22:02:55Z

Spot Values start

Show changes

Tom91: Io page link

2024-12-30T19:58:04Z

Io page link

← Older revision		Revision as of 19:58, 30 December 2024
Line 543:		Line 543:
	\| \|\| PumpOutType\|\|0\|\|1		\| \|\| PumpOutType\|\|0\|\|1
	\|0		\|0
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|80\|\| Out1Func		\|80\|\| Out1Func
	\|4\|\| PINFUNCS\|\|0\|\|15\|\|6		\|4\|\| PINFUNCS\|\|0\|\|15\|\|6
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|81\|\| Out2Func		\|81\|\| Out2Func
	\|3\|\| PINFUNCS\|\|0\|\|15\|\|7		\|3\|\| PINFUNCS\|\|0\|\|15\|\|7
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|82\|\| Out3Func		\|82\|\| Out3Func
	\|39		\|39
	\| PINFUNCS\|\|0\|\|15\|\|3		\| PINFUNCS\|\|0\|\|15\|\|3
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|83\|\| SL1Func		\|83\|\| SL1Func
	\|38 \|\| PINFUNCS\|\|0\|\|15\|\|0		\|38 \|\| PINFUNCS\|\|0\|\|15\|\|0
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|84 \|\| SL2Func		\|84 \|\| SL2Func
	\|7\|\| PINFUNCS\|\|0\|\|15\|\|0		\|7\|\| PINFUNCS\|\|0\|\|15\|\|0
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|85\|\| PWM1Func		\|85\|\| PWM1Func
	\| 6\|\| PINFUNCS\|\|0\|\|18\|\|0		\| 6\|\| PINFUNCS\|\|0\|\|18\|\|0
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|86\|\| PWM2Func		\|86\|\| PWM2Func
	\|5\|\| PINFUNCS\|\|0\|\|18 \|\|4		\|5\|\| PINFUNCS\|\|0\|\|18 \|\|4
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|87\|\| PWM3Func		\|87\|\| PWM3Func
	\|50\|\| PINFUNCS\|\|0\|\|18\|\|2		\|50\|\| PINFUNCS\|\|0\|\|18\|\|2
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|98\|\| GP12VInFunc		\|98\|\| GP12VInFunc
	\|51\|\| PINFUNCS\|\|0\|\| 13\|\|12		\|51\|\| PINFUNCS\|\|0\|\| 13\|\|12
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|99\|\| HVReqFunc		\|99\|\| HVReqFunc
	\| 36\|\| PINFUNCS\|\|0\|\|13\|\|12		\| 36\|\| PINFUNCS\|\|0\|\|13\|\|12
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|140		\|140
Line 594:		Line 594:
	\|12		\|12
	\|		\|
	\|		\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|141		\|141
Line 604:		Line 604:
	\|12		\|12
	\|		\|
	\|		\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|142		\|142
Line 614:		Line 614:
	\|12		\|12
	\|		\|
	\|		\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|110		\|110
Line 624:		Line 624:
	\|0		\|0
	\|		\|
	\|		\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|111\|\| GPA2Func		\|111\|\| GPA2Func
	\|35\|\| APINFUNCS\|\|0\|\|2\|\|0		\|35\|\| APINFUNCS\|\|0\|\|2\|\|0
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|114\|\| ppthresh		\|114\|\| ppthresh
	\| \|\| "dig"\|\|0\|\|4095\|\|2500		\| \|\| "dig"\|\|0\|\|4095\|\|2500
	\| \|\|		\| \|\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|115		\|115
Line 642:		Line 642:
	\|2500		\|2500
	\|		\|
	\|		\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|116		\|116
Line 652:		Line 652:
	\|2500		\|2500
	\|		\|
	\|		\|[[ZombieVerter IO\|see IO Function Page]] for more details
	\|-		\|-
	\|117		\|117

Tom91: catagories

2024-12-30T19:55:02Z

catagories

← Older revision		Revision as of 19:55, 30 December 2024
Line 1,002:		Line 1,002:
	\|}		\|}
	https://github.com/damienmaguire/Stm32-vcu/blob/master/include/param_prj.h		https://github.com/damienmaguire/Stm32-vcu/blob/master/include/param_prj.h
			[[Category:ZombieVerter]]

← Older revision		Revision as of 09:31, 25 March 2025
Line 268:		Line 268:
	\|21\|\|idcmax		\|21\|\|idcmax
	\| \|\| "A"\|\|0\|\|5000\|\|5000		\| \|\| "A"\|\|0\|\|5000\|\|5000
	\| \|\|Maximum DC input current		\| \|\|Maximum DC input current '''(regen current)'''
	\|-		\|-
	\|22\|\|idcmin		\|22\|\|idcmin
	\| \|\| "A"\|\|-5000\|\|0\|\|-5000		\| \|\| "A"\|\|-5000\|\|0\|\|-5000
	\| \|\|Maximum DC output current (~~regen~~)		\| \|\|Maximum DC output current '''(drive/discharge current)'''
	\|-		\|-
	\|23\|\|tmphsmax		\|23\|\|tmphsmax
Line 771:		Line 771:
	\|-		\|-
	\| idc\|\|A\|\|		\| idc\|\|A\|\|
	\|Shunt/BMS\|\|HV Current - From Shunt or BMS		\|Shunt/BMS\|\|HV Current - From Shunt or BMS ''(A negative current is discharging out of the battery, positive is charging in to the battery)''
	\|-		\|-
	\|KWh\|\|kwh\|\|		\|KWh\|\|kwh\|\|

← Older revision		Revision as of 10:38, 14 March 2025
Line 305:		Line 305:
	\|131\|\|throtrpmfilt		\|131\|\|throtrpmfilt
	\| \|\| "rpm/10ms"\|\|0.1 \|\|200\|\|15		\| \|\| "rpm/10ms"\|\|0.1 \|\|200\|\|15
	\| \|\|~~''-TBC''~~		\| \|\|Change of speed fed into the dynamic speed based throttle map. High value is slower response to rapid speed change. If you have low speed judder increase this value.
	\|-		\|-
	\| colspan="9" \|'''- Gearbox Control'''		\| colspan="9" \|'''- Gearbox Control'''