Isabellenhütte Heusler - Revision history

Royhen99: /* Links */

2024-08-23T00:26:22Z

Links

← Older revision		Revision as of 00:26, 23 August 2024
Line 26:		Line 26:
	IVT-S Current and voltage sensors for battery management systems ([https://www.isabellenhuette.de/en/precision-measurement/standard-products/ivt-series/ here])		IVT-S Current and voltage sensors for battery management systems ([https://www.isabellenhuette.de/en/precision-measurement/standard-products/ivt-series/ here])

	IVT-S Datasheet ([https://www.isabellenhuetteusa.com/wp-content/uploads/~~2021~~/08/~~Datasheet_IVT~~-~~S_V1~~.02.pdf here])		IVT-S Datasheet ([https://www.isabellenhuetteusa.com/wp-content/uploads/2022/07/Datasheet-IVT-S-V1.03.pdf here])

	IVT-MOD Datasheet ([https://web.archive.org/web/20240313133643/https://www.isabellenhuette.de/fileadmin/Daten/Praezisionsmesstechnik/IVT_Modular_datasheet_1.20.pdf here])		IVT-MOD Datasheet ([https://web.archive.org/web/20240313133643/https://www.isabellenhuette.de/fileadmin/Daten/Praezisionsmesstechnik/IVT_Modular_datasheet_1.20.pdf here])

J0hannes: /* IVT-S Current Measurement Device --> added picture of IVT-S and description of connections */

2024-04-11T16:54:25Z

IVT-S Current Measurement Device --> added picture of IVT-S and description of connections

← Older revision		Revision as of 16:54, 11 April 2024
Line 86:		Line 86:
	\|-		\|-
	\|}		\|}
			'''Connections of IVT-S and IVT-MOD'''
			[[File:Isa connections CAN and U sense.png\|alt=A typical connection of the IVT-S\|left\|thumb\|500x500px\|A typical connection of the IVT-S Three voltage measurement terminals (U1, U2, U3) have two pins each. As they are internally shorted, it is irrelevant which pin is connected for voltage measurement. X1 and X2 (not in the variant in picture) CAN and power supply: Pin a = Vcc, Pin b = CAN L, Pin c = CAN H, Pin d = GND]]
	[[Category:OEM]] [[Category:ISA Shunt]] [[Category:Isabellenhuette]]		[[Category:OEM]] [[Category:ISA Shunt]] [[Category:Isabellenhuette]]

J0hannes: /* IVT-S Current Measurement Device */

2024-03-15T07:42:58Z

IVT-S Current Measurement Device

← Older revision		Revision as of 07:42, 15 March 2024
Line 27:		Line 27:

	IVT-S Datasheet ([https://www.isabellenhuetteusa.com/wp-content/uploads/2021/08/Datasheet_IVT-S_V1.02.pdf here])		IVT-S Datasheet ([https://www.isabellenhuetteusa.com/wp-content/uploads/2021/08/Datasheet_IVT-S_V1.02.pdf here])

			IVT-MOD Datasheet ([https://web.archive.org/web/20240313133643/https://www.isabellenhuette.de/fileadmin/Daten/Praezisionsmesstechnik/IVT_Modular_datasheet_1.20.pdf here])

	IVT-S Arduino Library Files from EVTV ([http://store.evtv.me/proddetail.php?prod=1kshunt here]). Note: it's been reported that the header file ISA.h contains several errors.		IVT-S Arduino Library Files from EVTV ([http://store.evtv.me/proddetail.php?prod=1kshunt here]). Note: it's been reported that the header file ISA.h contains several errors.

Marcexec at 10:31, 14 June 2023

2023-06-14T10:31:42Z

← Older revision		Revision as of 10:31, 14 June 2023
Line 84:		Line 84:
	\|-		\|-
	\|}		\|}
			[[Category:OEM]] [[Category:ISA Shunt]] [[Category:Isabellenhuette]]

Royhen99: /* Connections */

2023-04-18T22:31:58Z

Connections

← Older revision		Revision as of 22:31, 18 April 2023
Line 64:		Line 64:
	\|-		\|-
	\|}		\|}
	~~Stadard~~ DuraClik can also be used. They do not use a separate pin retainer clip.		Standard DuraClik can also be used. They do not use a separate pin retainer clip.
	{\| class="wikitable"		{\| class="wikitable"
	\|+Isabellenhütte IVT-S Molex DuraClik connector part numbers		\|+Isabellenhütte IVT-S Molex DuraClik connector part numbers

Royhen99: /* Connections */

2023-04-18T22:31:31Z

Connections

@@ Line 33: / Line 33: @@
 == Connections ==
-The IVT-S uses Molex DuraClik connectors which can be purchased from RS, Digi-Key and Mouser (among others). Despite what it says in the Isabellenhütte data sheet, the correct part numbers are as shown below.
+The IVT-S uses Molex DuraClik connectors which can be purchased from RS, Digi-Key and Mouser (among others).
 Note that the DuraClik terminals are absolutely tiny and the [https://www.molex.com/molex/products/part-detail/application_toolin/0638190500 official Molex crimp tool] is very expensive. It is possible to get a decent crimp using a cheap and widely-available SN-28B 24-30AWG crimp tool, but you will need a bit of patience and very good eyesight. The connectors also have a retainer to permanently lock the terminals in place and you should seal the final assembly with UV glue. [https://youtu.be/oBM6ABD5Tsg Here] is an excellent video that shows you how to do this.
 {| class="wikitable"
-|+Isabellenhütte IVT-S Molex connector part numbers
+|+Isabellenhütte IVT-S Molex DuraClik connector part numbers
 !Description
 !Molex part number
@@ Line 54: / Line 83: @@
 |538-50212-8100
 |-
 |}

Sigdigits: /* Links */ https://openinverter.org/forum/viewtopic.php?f=9&t=2930&sid=7a519f6b14162a256a2d67af887fc0be

2023-03-26T23:12:11Z

Links: https://openinverter.org/forum/viewtopic.php?f=9&t=2930&sid=7a519f6b14162a256a2d67af887fc0be

← Older revision		Revision as of 23:12, 26 March 2023
Line 29:		Line 29:

	IVT-S Arduino Library Files from EVTV ([http://store.evtv.me/proddetail.php?prod=1kshunt here]). Note: it's been reported that the header file ISA.h contains several errors.		IVT-S Arduino Library Files from EVTV ([http://store.evtv.me/proddetail.php?prod=1kshunt here]). Note: it's been reported that the header file ISA.h contains several errors.

			IVT-S .dbc file for CAN message decoding (https://openinverter.org/forum/viewtopic.php?f=9&t=2930&sid=7a519f6b14162a256a2d67af887fc0be)

	== Connections ==		== Connections ==

Arber333: Addition of a link to modified ISA library

2022-08-23T07:09:56Z

Addition of a link to modified ISA library

← Older revision		Revision as of 07:09, 23 August 2022
Line 17:		Line 17:

	Watch this process being carried out using a Nissan Leaf VCU control board (link coming soon)		Watch this process being carried out using a Nissan Leaf VCU control board (link coming soon)

			To quickly select current direction on the fly you can use the files of adapted [https://github.com/arber333/SimpleISA ISA library]. Use + or - keys to determine the ISA current flow interpretation.

	== Programming The IVT-S With an Arduino Uno and CAN Bus Shield ==		== Programming The IVT-S With an Arduino Uno and CAN Bus Shield ==

Et0: /* Corrected link for ISA datasheet*/

2021-10-30T15:52:54Z

Corrected link for ISA datasheet

← Older revision		Revision as of 15:52, 30 October 2021
Line 24:		Line 24:
	IVT-S Current and voltage sensors for battery management systems ([https://www.isabellenhuette.de/en/precision-measurement/standard-products/ivt-series/ here])		IVT-S Current and voltage sensors for battery management systems ([https://www.isabellenhuette.de/en/precision-measurement/standard-products/ivt-series/ here])

	IVT-S Datasheet ([https://www.~~isabellenhuette~~.de/~~fileadmin~~/~~Daten~~/~~Praezisionsmesstechnik~~/Datasheet_IVT-S.pdf here])		IVT-S Datasheet ([https://www.isabellenhuetteusa.com/wp-content/uploads/2021/08/Datasheet_IVT-S_V1.02.pdf here])

	IVT-S Arduino Library Files from EVTV ([http://store.evtv.me/proddetail.php?prod=1kshunt here]). Note: it's been reported that the header file ISA.h contains several errors.		IVT-S Arduino Library Files from EVTV ([http://store.evtv.me/proddetail.php?prod=1kshunt here]). Note: it's been reported that the header file ISA.h contains several errors.

Clanger9: Add hint for Due USB ports

2020-08-24T17:49:16Z

Add hint for Due USB ports

← Older revision		Revision as of 17:49, 24 August 2020
Line 12:		Line 12:
	# Install the [https://github.com/collin80/due_wire due_wire] and [https://github.com/collin80/Wire_EEPROM Wire_EEPROM] libraries from GitHub.		# Install the [https://github.com/collin80/due_wire due_wire] and [https://github.com/collin80/Wire_EEPROM Wire_EEPROM] libraries from GitHub.
	# Install the [https://openinverter.org/forum/download/file.php?id=3829 ISA library]. There is an error in this library if you download it from the EV-TV site: <code>ISA.cpp</code> specifies <code>#include <ISA2.h></code>, but the file is actually named <code>ISA.h</code>. This has been fixed in the version linked to here.		# Install the [https://openinverter.org/forum/download/file.php?id=3829 ISA library]. There is an error in this library if you download it from the EV-TV site: <code>ISA.cpp</code> specifies <code>#include <ISA2.h></code>, but the file is actually named <code>ISA.h</code>. This has been fixed in the version linked to here.
	# Load up the [https://openinverter.org/forum/download/file.php?id=3830 demo sketch] on a due with a can transceiver or any of the VCUs.		# Load up the [https://openinverter.org/forum/download/file.php?id=3830 demo sketch] on a due with a can transceiver or any of the VCUs (via the programming USB port).
	# ~~From~~ the ~~menu~~ choose the initialise option (enter i into serial monitor)		# Now connect to the Due native USB port with your serial monitor and choose the initialise option (enter i into serial monitor)
	# Reboot and normal data should be pumped out.		# Reboot and normal data should be pumped out.