CAD Models - Revision history

Bigpie: /* Drive Units (motor/gearbox/inverter) */

2026-04-12T17:52:41Z

Drive Units (motor/gearbox/inverter)

← Older revision		Revision as of 17:52, 12 April 2026
Line 279:		Line 279:
	\|Model S/X SRDU		\|Model S/X SRDU
	\|GrabCAD		\|GrabCAD
			GrabCAD
	\|James Warner		\|James Warner
			Jamie Jones
	\|https://grabcad.com/library/tesla-rear-small-drive-unit-3d-scan-1		\|https://grabcad.com/library/tesla-rear-small-drive-unit-3d-scan-1
			https://grabcad.com/library/tesla-front-sdu-plates-1
	\|-		\|-
	\|Tesla		\|Tesla
Line 319:		Line 322:
	\|-		\|-
	\|Jaguar		\|Jaguar
	\|iPace Front		\|iPace Front Motor
	\|GrabCAD		\|GrabCAD
	\|Jamie Jones		\|Jamie Jones
	\|[https://grabcad.com/library/jaguar-ipace-front-motor-1 ~~https://grabcad.com/]~~		\|https://grabcad.com/library/jaguar-ipace-front-motor-1
	\|}		\|}

Maboyce: Moved iPace scan to right section

2026-03-18T22:58:40Z

Moved iPace scan to right section

← Older revision		Revision as of 22:58, 18 March 2026
Line 253:		Line 253:
	\|TomdB		\|TomdB
	\|[https://grabcad.com/library/gs450h-gearbox-1 https://grabcad.com/]		\|[https://grabcad.com/library/gs450h-gearbox-1 https://grabcad.com/]
	\|-
	~~\|Jaguar~~
	~~\|iPace Front~~
	~~\|GrabCAD~~
	~~\|Jamie Jones~~
	~~\|[https://grabcad.com/library/jaguar-ipace-front-motor-1 https://grabcad.com/]~~
	\|}		\|}

Line 323:		Line 317:
	\|LRBen		\|LRBen
	\|https://grabcad.com/library/2017-2020-mg-zs-front-drive-unit-1		\|https://grabcad.com/library/2017-2020-mg-zs-front-drive-unit-1
			\|-
			\|Jaguar
			\|iPace Front
			\|GrabCAD
			\|Jamie Jones
			\|[https://grabcad.com/library/jaguar-ipace-front-motor-1 https://grabcad.com/]
	\|}		\|}

Maboyce: /* Motors */ Added iPace drive unit scan

2026-03-18T22:55:18Z

Motors: Added iPace drive unit scan

← Older revision		Revision as of 22:55, 18 March 2026
Line 253:		Line 253:
	\|TomdB		\|TomdB
	\|[https://grabcad.com/library/gs450h-gearbox-1 https://grabcad.com/]		\|[https://grabcad.com/library/gs450h-gearbox-1 https://grabcad.com/]
			\|-
			\|Jaguar
			\|iPace Front
			\|GrabCAD
			\|Jamie Jones
			\|[https://grabcad.com/library/jaguar-ipace-front-motor-1 https://grabcad.com/]
	\|}		\|}

Maboyce: Added new Gen3 Prius scan

2026-02-18T19:32:12Z

Added new Gen3 Prius scan

← Older revision		Revision as of 19:32, 18 February 2026
Line 153:		Line 153:
	\|		\|
	\|[https://grabcad.com/library/prius-gen-3-inverter-1 https://grabcad.com/]		\|[https://grabcad.com/library/prius-gen-3-inverter-1 https://grabcad.com/]
			\|-
			\|Toyota
			\|Prius (Gen 3) Inverter
			\|Openinverter Forum
			\|Anders
			\|[https://openinverter.org/forum/viewtopic.php?p=89252#p89252 https://openinverter.org/forum/]
	\|-		\|-
	\|Toyota		\|Toyota

Maboyce: Added a few more scans from GrabCAD

2026-02-17T18:06:58Z

Added a few more scans from GrabCAD

← Older revision		Revision as of 18:06, 17 February 2026
Line 101:		Line 101:
	\|Alex		\|Alex
	\|[https://grabcad.com/library/battery-module-etron-taycan-1 https://grabcad.com/]		\|[https://grabcad.com/library/battery-module-etron-taycan-1 https://grabcad.com/]
			\|-
			\|LG Chem
			\|Chrysler Pacifica 16s module
			\|GrabCAD
			\|DIY ElectricCar
			\|[https://grabcad.com/library/pacifica-lgchem-16s-battery-module-1 https://grabcad.com/]
			\|-
			\|VW
			\|ID3/4 module
			\|GrabCAD
			\|Paul Baque
			\|[https://grabcad.com/library/vw-id3-and-id4-battery-module-1 https://grabcad.com/]
	\|}		\|}

Line 457:		Line 469:
	\|TRW		\|TRW
	\|From Opel Astra		\|From Opel Astra
	\|~~GrabCad~~		\|GrabCAD
	\|J0hannes		\|J0hannes
	\|[https://grabcad.com/library/trw-powersteering-pump-1 Link]		\|[https://grabcad.com/library/trw-powersteering-pump-1 Link]
Line 464:		Line 476:
	\|BMW		\|BMW
	\|I3		\|I3
	\|~~GrabCad~~		\|GrabCAD
	\|Wim Boone		\|Wim Boone
	\|[https://grabcad.com/library/bmw-i3-lim-1 https://grabcad.com/]		\|[https://grabcad.com/library/bmw-i3-lim-1 https://grabcad.com/]
Line 471:		Line 483:
	\|Tesla		\|Tesla
	\|Model 3/Y		\|Model 3/Y
	\|~~GrabCad~~		\|GrabCAD
	\|Wim Boone		\|Wim Boone
	\|[https://grabcad.com/library/tesla-model-3-y-contactor-1 https://grabcad.com/]		\|[https://grabcad.com/library/tesla-model-3-y-contactor-1 https://grabcad.com/]
Line 478:		Line 490:
	\|Tesla		\|Tesla
	\|Model 3/Y		\|Model 3/Y
	\|~~GrabCad~~		\|GrabCAD
	\|Wim Boone		\|Wim Boone
	\|[https://grabcad.com/library/tesla-model-3-y-ccs-contactor-1 https://grabcad.com/]		\|[https://grabcad.com/library/tesla-model-3-y-ccs-contactor-1 https://grabcad.com/]
Line 485:		Line 497:
	\|Tesla		\|Tesla
	\|Model 3/Y		\|Model 3/Y
	\|~~GrabCad~~		\|GrabCAD
	\|Wim Boone		\|Wim Boone
	\|[https://grabcad.com/library/tesla-model-3-y-12v-connector-penthouse-1 https://grabcad.com/]		\|[https://grabcad.com/library/tesla-model-3-y-12v-connector-penthouse-1 https://grabcad.com/]
Line 492:		Line 504:
	\|Honda		\|Honda
	\|Element		\|Element
	\|~~GrabCad~~		\|GrabCAD
	\|Matt Boyce		\|Matt Boyce
	\|[https://grabcad.com/library/honda-accelerator-pedal-sensor-scan-1 https://grabcad.com/]		\|[https://grabcad.com/library/honda-accelerator-pedal-sensor-scan-1 https://grabcad.com/]
			\|-
			\|Empty battery tray
			\|Tesla
			\|Model 3
			\|GrabCAD
			\|Kaleb Reinhart
			\|[https://grabcad.com/library/tesla-model-3-battery-enclosure-tray-3d-scan-1 https://grabcad.com]
			\|-
			\|BMS
			\|Orion
			\|24 - 180 cell models
			\|Orion
			\|Orion
			\|[https://www.orionbms.com/downloads/drawings/orionbms2_enclosure_3d_drawings.zip https://www.orionbms.com/]
	\|}		\|}

Maboyce: /* Batteries */ Added links to Hyundai GMP module and Porsche/Audi module

2026-02-17T05:32:53Z

Batteries: Added links to Hyundai GMP module and Porsche/Audi module

@@ Line 89: / Line 89: @@
 |Manny
 |[https://grabcad.com/library/e208-module-1 https://grabcad.com/]
 |}

Stocki: added request

2025-11-27T18:09:53Z

added request

← Older revision		Revision as of 18:09, 27 November 2025
Line 490:		Line 490:
	''Example request: Motor - Nissan - Leaf Gen 1 EM61 (without gearbox)''		''Example request: Motor - Nissan - Leaf Gen 1 EM61 (without gearbox)''

			Motor - Lexus - GS300H

			Engine compartment - BMW - E9x

			Battery pack - BMW - PHEV

	''Note: If anyone is able to take a scan or source an existing model for a request, please add it to the tables above and remove the request from this section. Many thanks.''		''Note: If anyone is able to take a scan or source an existing model for a request, please add it to the tables above and remove the request from this section. Many thanks.''
	[[Category:CAD]] [[Category:Resources]]		[[Category:CAD]] [[Category:Resources]]

LRBen: /* Drive Units (motor/gearbox/inverter) */ Added MG ZS

2025-11-08T19:16:18Z

Drive Units (motor/gearbox/inverter): Added MG ZS

← Older revision		Revision as of 19:16, 8 November 2025
Line 281:		Line 281:
	\| Volt Influx		\| Volt Influx
	\| https://grabcad.com/library/outlander-phev-rear-motor-1 and https://grabcad.com/library/outlander-phev-rear-gearbox-1		\| https://grabcad.com/library/outlander-phev-rear-motor-1 and https://grabcad.com/library/outlander-phev-rear-gearbox-1
			\|-
			\|MG
			\|ZS 2017-2020 Front unit
			\|GrabCAD
			\|LRBen
			\|https://grabcad.com/library/2017-2020-mg-zs-front-drive-unit-1
	\|}		\|}

LRBen: /* Batteries */ Added E208 Module

2025-07-24T20:03:15Z

Batteries: Added E208 Module

← Older revision		Revision as of 20:03, 24 July 2025
Line 83:		Line 83:
	\|TomdB		\|TomdB
	\|[https://grabcad.com/library/vw-gte-hybrid-battery-module-1 https://grabcad.com/]		\|[https://grabcad.com/library/vw-gte-hybrid-battery-module-1 https://grabcad.com/]
			\|-
			\|Stellantis
			\|Peugeot E-208/Corsa E 50kWh module
			\|GrabCAD
			\|Manny
			\|[https://grabcad.com/library/e208-module-1 https://grabcad.com/]
	\|}		\|}

Maboyce: Added Honda Accelerator Pedal sensor link

2025-01-20T05:18:22Z

Added Honda Accelerator Pedal sensor link

← Older revision		Revision as of 05:18, 20 January 2025
Line 464:		Line 464:
	\|Wim Boone		\|Wim Boone
	\|[https://grabcad.com/library/tesla-model-3-y-12v-connector-penthouse-1 https://grabcad.com/]		\|[https://grabcad.com/library/tesla-model-3-y-12v-connector-penthouse-1 https://grabcad.com/]
			\|-
			\|Accelerator Pedal Cable Sensor
			\|Honda
			\|Element
			\|GrabCad
			\|Matt Boyce
			\|[https://grabcad.com/library/honda-accelerator-pedal-sensor-scan-1 https://grabcad.com/]
	\|}		\|}